LIVE MEMORY PLAYBACK ON HDD/DVD DECK EN 37
Temporary recording for Live Memory (HDD deck only) Simultaneous Recording and Playback
This unit automatically records the AV input being received, within the specified range of time, to the reserved space on the hard disk. The time range can be set for 30 minutes, 1 hour, and 3 hours.
(A pg. 59)
You can play back the previous part of the AV input you are recording or other programs available in the Library Database.
1Press NAVIGATION. The Library Database Navigation screen appears.
NOTE:
Previous temporary recordings will be overwritten since the unit is always recording the AV input being received. Thus, it is not possible to play back programs recorded beyond the specified range of time since they are already overwritten. To avoid this in order to save titles, perform normal recording or RetroActive Recording (See below).
2Press selection keys to select AORIGINALB, then press
ENTER.
3Press selection keys to select the desired title, then press
ENTER.
●For
(A pg. 59).
About limitation on temporary recording
The temporary recording for Live Memory is canceled in the following cases, and will start all over again when it is to resume.
●When the power is turned off
●When the system is powered again after a power failure was occurred
●When normal recording or RetroActive Recording is performed
●When the ALIVE MEMORYB setting is changed (A pg. 59)
●When dubbing is performed by pressing DUBBING (A pg. 45)
●When ADVB is selected by pressing INPUT SELECT +/– (A pg. 49)
4Press selection keys to select the desired playback method (ABEGINNINGB, ARESUMEB or AREPEATB), then press
ENTER.
●Playback of the selected title begins automatically.
5Press o to stop playback.
●The external input screen resumes.
NOTES:
●You can use various playback features during Live Memory Playback.
●To stop simultaneous playback, press o. The external input screen resumes. To stop actual recording, press o twice again.
RetroActive Recording (HDD deck only)
You can start recording from the previous part of the AV input you are currently watching (temporarily recorded on the background). (See ATemporary recording for Live Memory (HDD deck only)B above.)
1Press S or O to locate the point to start recording from.
●Each press of O increases the reverse search speed.
2Press R on the unit to start RetroActive Recording. Or while holding R, press I on the remote control.
3Press o twice to stop RetroActive Recording.
●The external input screen resumes.
NOTES:
●You cannot use RetroActive Recording for inputs other than the one you are currently watching.
●Recording speed is automatically set to FR65 mode when RetroActive Recording is started.
●Temporarily recorded data prior to the beginning of RetroActive Recording is erased when RetroActive Recording started.
Instant Replay
You can move back the playback position slightly during recording or Live Memory Playback.
Press w on the remote control or INSTANT REPLAY on the unit.
8DVD-RAM
●Pressing once during recording skips back for approximately 30 seconds and starts Live Memory Playback. While pressing once during Live Memory Playback skips back for approximately 7 seconds and resumes playback.
●Each subsequent press skips back for approximately 7 seconds and resumes playback.
●Pressing while paused skips back for approximately 7 seconds and resumes pause.
8HDD
●Pressing during recording skips back for approximately 7 seconds and starts Live Memory Playback. While pressing during Live Memory Playback skips back for approximately 7 seconds and resumes playback.
●Each press skips back for approximately 7 seconds and resumes playback.
●Pressing while paused skips back for approximately 7 seconds and resumes pause.
Resuming Playback (HDD deck only)
You can resume playback of an AV input you were recording or watching from the point you have paused.
1Press W to pause an AV input.
●Recording continues when recording.
2Press I to start Live Memory Playback.
●Playback resumes from the paused position.
3Press o to resume the external input screen.