48 EN EDITING
Dubbing From DV To DVD | About Disc Remaining Display |
|
|
|
| |||||||
(Dubbing A Part Of A Cassette) | When dubbing from HDD to DVD, the unit displays the time | |||||||||||
information for dubbing by bar meter. By comparing the disc | ||||||||||||
|
| remaining time and the necessary time for dubbing of the selected | ||||||||||
It is possible to select the images on the DV cassette to be dubbed | ||||||||||||
items, it is possible to check if the dubbing can be performed | ||||||||||||
from the DV deck to the DVD deck using AMANUALB dubbing. | ||||||||||||
completely or not. |
|
|
|
| ||||||||
1 | Load the Mini DV cassette you want to dub. Make sure its erase |
|
|
|
| |||||||
When performing the High Speed Dubbing |
|
|
|
| ||||||||
| protection switch is set to ASAVEB. |
|
|
|
| |||||||
● Set ADV AUDIO RECB to the appropriate mode. (A pg. 60) |
|
| Capacity of a disc | Remaining capacity | ||||||||
2 | Press DUBBING to access the Dubbing Menu screen. |
|
| |||||||||
|
|
|
|
|
|
|
|
|
| |||
3 | Press selection keys to select ADVNDVDB, then press |
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
| |||
|
|
|
|
|
| 21% |
| |||||
4 | ENTER. |
| Dark green: Length of already recorded item |
|
|
|
| |||||
Select AMANUALB, then press ENTER. |
|
|
|
|
| |||||||
5 Press selection keys to select ASELECT RECORDING |
| Light green: Length of selected item |
|
|
|
| ||||||
| Yellow: Length of the item now being selected by arrow | |||||||||||
| MODEB, then press ENTER. Press selection keys to select |
| Red: Excess over the capacity |
|
|
|
| |||||
6 | the desired option, then press ENTER. |
|
|
|
|
|
|
|
|
|
| |
Press selection keys to select ASELECT SOUND MODEB, | When performing the Just Dubbing |
|
|
|
| |||||||
| then press ENTER. Press selection keys to select the desired |
|
|
|
|
|
|
|
|
|
| |
option, then press ENTER.
7Press G to select ACONFIRMB, then press ENTER. The confirmation screen appears.
8Press selection keys to select AEXECUTEB or AAUTO FINALIZEB, then press ENTER for confirmation.
●If the DV deck is in the stop mode, the unit will start dubbing from the current tape position.
●If the DV deck is in the pause mode, the unit will start dubbing from the point where the tape was paused after automatically rewinding the tape for 2 seconds.
●To cancel the dubbing, press o then selection keys to select ACANCELB and press ENTER to confirm.
TOTAL 105MIN
●The unit displays the status on the assumption that the selected items are dubbed in the lowest transfer rate.
●The total time of a loaded disc is displayed on the right of the bar meter.
When performing the Manual Dubbing
MAX FR240
9Upon completing dubbing, the tape stops and ADUBBING COMPLETEDB appears on the TV screen. Press ENTER to end.
●The tape will automatically be rewound.
NOTES:
●The program information at the DV deck will not be dubbed.
●When there are blanks on the tape of more than 2 seconds, the DVD deck will enter into pause mode while playback on DV deck continues. This also applies to portions of the DV tape that are damaged or unreadable. The last image is displayed on the TV screen. Dubbing will resume once recorded portion is detected. If the blank portion continues until the end of the tape, ADUBBING COMPLETEDB appears on the TV screen when the tape end is reached and the tape rewinds automatically.
●Dubbing copyright guarded tape is not possible.
●When dubbing is in progress, o and ON SCREEN buttons are functional.
●The unit displays the status on the assumption that the selected items are dubbed in the lowest transfer rate.
●The available highest transfer rate is displayed on the right of the bar meter.