70 EN SPECIFICATIONS
GENERAL
Power requirement
AC 120 VH, 60 Hz
Power consumption
Power on: 45 W
Power off: 2.5 W
Laser specification
For CD
Wavelength: 770 to 810 nm
Output: 0.4 mW
For DVD
Wavelength: 653 to 663 nm
Output: 1.0 mW
Temperature
Operating: 5f to 35f (41°F to 95°F)
Storage:
Operating position
Horizontal only
Dimensions (WxHxD)
435 mm x 96 mm x 372 mm
Weight
5.8 kg (12.9 lbs)
Input/Output
Video input: 0.5 - 2.0
Video output: 1
Audio output:
Y:0.8 - 1.2
C:0.2 - 0.4
Y:1.0
C:0.3
DV:
Remote Input: R3.5 mm Jack Component video output:
Y: 1.0
CB/CR, PB/PR: 0.7
Digital audio output: Optical, Coaxial
Corresponding to Dolby Digital and DTS Digital Surround Bit stream
Selectable in digital audio output setting menu
VIDEO/AUDIO (DVD Deck)
Recording time
Maximum 8 hours (with 4.7 GB disc) (XP): Approx. 1 hour
(SP): Approx. 2 hours
(LP): Approx. 4 hours
(EP): Approx. 6 hours
(FR): Approx. 1 hour - 8 hours
Audio recording system
Dolby Digital (2 ch)
Linear PCM (XP mode only)
Video recording compression system
MPEG2 (CBR/VBR)
VIDEO/AUDIO (HDD Deck)
Video recording compression system
MPEG2 (VBR)
Audio recording system
Dolby Digital (2 ch)
Linear PCM (XP mode only)
Recording time
Maximum 71 hours (with 40 GB HDD) (XP): Approx. 8 hours
(SP): Approx. 16 hours
(LP): Approx. 33 hours
(EP): Approx. 49 hours
(FR): Approx. 71 hours
VIDEO/AUDIO (DV Deck)
Signal system
NTSC color signal and EIA monochrome signal, 525 lines/60 fields
Recording system
Digital Component Recording
Format
DV format (SD mode)
Cassette
Mini DV Cassette
Maximum recording time
(SP): 80 min. with
(LP): 120 min. with
Audio recording system PCM 48 kHz, 16 bit (2 ch)/ 32 kHz, 12 bit (4 ch)
Specifications shown are for SP mode unless otherwise specified.
ACCESSORIES
Provided accessories
Audio/Video cable,
Infrared remote control unit,
AAAB battery x 2
E.& O.E. Design and specifications subject to change without notice.
ATTENTION:
This unit contains microcomputers. External electronic noise or interference could cause malfunctioning. In such cases, switch the unit off and unplug the AC power cord. Then plug it in again and turn the unit on. Take out the disc. After checking the disc, operate the unit as usual.