JVC HM-HDS1EU Select the language, Perform Auto Set Up, Press rt to select your language code

EN 15

C Select the language.

Press OK. The Language Set display appears on the front display panel and/or on the TV screen.

On the front display panel

Press rt to select your language code.

Language Code
ENGLISH	:	01	NEDERLANDS	:	06
DEUTSCH	:	02	SVENSKA	:	07
FRANCAIS	:	03	NORSK	:	08
ITALIANO	:	04	SUOMI	:	09
CASTELLANO	:	05	DANSK	:	10

(Example) DEUTSCH (02) is selected for SUISSE (41).

International telephone	Language code
country code

●If you are using the on-screen display, the AUTO SET

screen will appear. As Auto
Set Up progresses, the “q”
mark on the TV screen
moves from left to right.
When the Auto Set Up is
completed, “SCAN
COMPLETED” appears for
about 5 seconds, then the	Beginning	End
normal screen appears.

●If you have connected the recorder to a TV offering T-V Link via a 21-pin SCART cable ( pg. 12) and the TV is turned on,

the recorder automatically performs “Preset Download” ( pg. 16) even if you select “Auto” in step D.

ATTENTION

On the on-screen display

Press rt to move the highlight bar (pointer) to the language of your choice.

DANSK

SUOMI

NORSK SVENSKA NEDERLANDS CASTELLANO ITALIANO FRANCAIS

DEUTSCH

ENGLISH

Once you have performed Auto Set Up, even if the recorder’s memory backup has expired, all the stored stations and their Guide Program numbers remain in the recorder’s memory and the recorder will not perform Auto Set Up again. You only need to set the clock. ( pg. 88)

If you have moved to a different area, perform each setting as required.

●Tuner Set ( pg. 80)

●Clock Set ( pg. 88)

If a new station starts broadcasting in your area, perform tuner setting ( pg. 80).

NOTES:

D Perform Auto Set Up.

Press OK. The AUTO SET/T-V LINK display appears on the front display panel and/or on the TV screen.

On the front display panel

Press rt to select “Auto” and press OK or e.

On the on-screen display

Press rt to move the highlight bar (pointer) to “AUTO SET” and press OK or e.

“Auto” blinks on the front display panel; do NOT press any button on the recorder or remote control until the front display panel shows clock time, “(CH) 1” or

“– –:– –” as illustrated on page 17.

●In the area where no TV station transmits a PDC (Programme Delivery Control) signal, the recorder can perform neither Auto Clock Set nor Auto Guide Program Number Set.

●If there is a power cut, or if you press 1 or MENU while Auto Set Up is in progress, Auto Set Up will be interrupted; be sure to turn off the recorder power once and try again from step A.

●Auto Clock Set may not function properly depending on the reception condition.

●If no sound accompanies the picture or the audio sounds unnatural on some channels that have been stored by Auto Set Up, the TV system setting for those channels may be incorrect.

Select the appropriate TV system for those channels ( pg. 86, “INFORMATION”).