JVC HM-HDS1EU specifications Start dubbing, Insert a cassette with the record safety tab intact

Page 57

EN 57

E Select the VHS deck.

Press S-VHS.

F Load a cassette.

Insert a cassette with the record safety tab intact.

G Set the recording speed.

Press MODE (p).

●For the VHS deck:

It is not possible to select EP mode if “COLOUR SYSTEM” is set to “MESECAM”. ( pg. 76)

H Locate the start point.

ASearch for the point where you want to start dubbing by pressing 4, 5 or 3 then press 8.

BPress 7 and 9 simultaneously to enter the Record- Pause mode.

I Select the HDD deck.

Press HDD. The Easy Dubbing screen appears again.

●To cancel dubbing, select “CANCEL”.

J Start dubbing.

Press w e to move the arrow to “DUB START”, then press OK. When the dubbing completes successfully, the message “DUBBING COMPLETED” appears on the TV screen.

●To stop dubbing, press 8.

●Once the dubbing is stopped, it can not be resumed. In this case, the message appears on the TV screen, and the programmes on the hard disk drive are not deleted even though “DUB/DEL” is selected.

NOTE:

If you start dubbing without setting the VHS deck to Record Pause mode in step H, you can watch the preview.

Page 56 Page 58
Image 57
Page 56 Page 58
Contents HDD & S-VHS Video Recorder English Safety Precautions Do not block the recorder’s ventilation openings or holes For ItalyBefore installing the recorder Precaution for Hard Disk DriveBefore using the recorder While using the recorderFront View Rear View Front Display Panel ON-SCREEN Display for HDD deck ON-SCREEN Display for VHS deck 10 EN Remote ControlRemote Control LCD How To Use12 EN Check the contentsSituate the recorder Connect the recorder to TVVideo Connection 8To connect to a TV with S-VIDEO/AUDIO in connectors14 EN Auto Set UpTurn on the recorder Select your countrySelect the language Perform Auto Set UpPress rt to select your language code Press rt to select Auto and press OK or ePerform Preset Download 16 ENPress rt to select CH - and press OK or e Just Clock Language for the on-screen display18 EN LanguageSituate the Satellite Controller Installing Satellite ControllerAttach the Satellite Controller Make connections20 EN Setting satellite receivers brand and channelVCR Auto Standby Direct Rec TV Auto Power On22 EN Start playback Basic PlaybackPause playback Stop playbackIcons and their meanings 24 ENSelect the programmes Access the Index screenPress NAVIGATION. The HDD Navigation screen appears Confirm that Index screen appears. Then, press t or OK26 EN Live Memory PlaybackStart Live Memory Playback Stop Live Memory PlaybackSlow Motion High-Speed SearchPause during playback Activate frame-by-frame playback28 EN Engage the ITR mode Instant Timer Recording ITRReceiving Stereo and Bilingual Programmes Set the recording durationLoad a cassette 30 ENSelect the VHS deck Set the tape speedUsable cassettes Find the programme start point32 EN Playback with VCR NavigationSearch for the programme Access the VCR Navigation screenLoad the cassette Select the programme34 EN Next Function Memory Index SearchActivate Repeat Playback Stop Repeat Playback36 EN Adjust the tracking manuallyManual Tracking Override automatic trackingRecording Resume Function Watching AnotherAccidental erasure prevention View38 EN Tape Remaining TimeRetake Press S-VHS ET on the recorder Engage the S-VHS ET modeOn-screen Display To Record Nicam Stereo and Bilingual ProgrammesRecording Playback42 EN Engage the recorder’s timer mode Set the VPS/PDC modeSet the category Satellite Receiver Users44 EN Express Timer ProgrammingClassics Comedy Drama VPS/PDC RecordingReturn to the timer mode Cancel or change a programmeDisengage the timer mode. VHS deck only 46 ENRecording mode Select the L-2 Select modeProgramme Recording Before performing the following stepsSet the remote control code Change the remote control code48 EN Display the codeTV PR +/-, TV %+/- Volume, TV Muting, number keys TV Multi-Brand Remote ControlSet the TV brand code Operate the TV50 EN Satellite Receiver Multi-Brand Remote ControlSet the satellite receiver brand code Operate the satellite receiverAbout Hybrid Navigation Display for modification or deletionDisplay for editing Access the modify screen Access the Navigation screenModify Information 52 ENEnter new title Modify Programme TitleRegister new title Return to the Navigation screenModify Category 54 ENSelect new category Register new categoryDelete Information Access the delete screenConfirm the deletion Press w e to select DELETE, then press OKDubbing 56 ENEasy Dubbing from HDD deck to VHS deck Insert a cassette with the record safety tab intact Start dubbingPress HDD. The Easy Dubbing screen appears again From HDD to VHS 58 ENPrepare the HDD deck for dubbing Prepare the VHS deck for dubbingPress 8. Then press S-VHSand press From VHS to HDDAccess the edit screen Access the R.A.Edit screen60 EN Select other edit-in and edit-out points Access the Start Editing screenStart editing Return to R.A.Edit screenEdit From a Camcorder Audio and S-VIDEO input connectors62 EN PlayerSelect the recording deck Set the recorder’s input modeSet the edit mode. VHS deck only Start the camcorder64 EN Access the Input/Output Set screenInput Setting Select SettingDecoder connector Select the input mode for the VIDEO/S Video connector66 EN Another Video RecorderRecorder Player 68 EN Audio DubbingPre-recorded tape Audio-dubbed tape CD player, etcEngage the Audio Dubbing mode End Audio DubbingPress A.DUB Satellite receiver Simple ConnectionsDecoder Perfect Connections72 EN Select the input modeConnect the decoder Set the tunerMake connections Connecting/Using a Stereo SystemAccess the HDD Set Up screen Mode SetSelect the mode Select the mode settingTo record in S-VHS ET on a VHS cassette To record in S-VHSTo record in VHS To record in VHS on an S-VHS cassetteEntire programme while timer-recording in SP mode VCR SET UP 176 EN For ExampleUsing this video recorder as the source player for editing Correction to the luminance signal to enhance detailOn or OFF  pg Preference. Normally select Auto78 EN VCR SET UP 2Guide Program Number Set Showview System SetupGuide Program Number Enter the Guide Program numberTuner Set Access the Auto Channel Set screen80 EN Auto Channel SetPerform Auto Channel Set View the Confirmation screenPress OK twice Manual Channel Set Access the Confirmation screenSelect the channel position Select the bandDelete a Channel Select the new position 84 ENSet Stations B Set Stations a86 EN When Receiving a Scrambled BroadcastStation Name TV Station And ID ListAccess the Clock Set screen Clock Set88 EN Set Just Clock Set the date and timeSet the source channel position for clock data Start the clock operation90 EN Tape, cover the hole where the tab Insert a cassette, or using adhesiveInput mode is not correct Set the input mode to L-1, L-2 or Recording cannot be startedCheck the programmed data and re 92 ENRecorder when Preset Connect the fully-wired 21-pinPerform Preset Download again Remote control won’t operateNAVIGATION.  pg 94 ENTo set the timer programme, the clock must be set Cancel a timer programme already set. pgTimer programme. pg Appears when you stop setting timer programme96 EN What happens if the tape runs out during recording? # remain lit on the front display panel. Is there a problem?98 EN Express Timer Programming Audio Dubbing Auto Channel Set Auto Set UpTape Position Indicator Tape Remaining Time S.T. Picture SystemCountry code International telephone Language code

HM-HDS1EU specifications

The JVC HM-HDS1EU is a versatile and advanced video cassette recorder that embodies the combination of traditional tape recording and modern technology. This device is particularly notable for its ability to handle both S-VHS and VHS formats, making it an excellent choice for users who have a collection of tapes in both formats. The HM-HDS1EU allows for high-quality playback and recording, giving users the ability to enjoy their vintage media with impressive clarity.

One of the standout features of the HM-HDS1EU is its S-VHS ET (Extended Technology) capability. This innovation enhances the quality of VHS recordings by utilizing S-VHS technology, which results in a higher resolution and improved picture quality. The device also supports the advanced S-VHS recording standards that offer a more vibrant color palette and sharper images compared to standard VHS.

The HM-HDS1EU comes equipped with various input and output options that enhance its functionality. It features composite video and S-Video outputs, which provide users with flexibility in connecting to different display devices. The video stabilizer technology is particularly beneficial for users, ensuring smooth playback even on tapes that may have degraded over the years. By utilizing these outputs, users can easily integrate the recorder into their home entertainment systems.

Another important aspect of the HM-HDS1EU is its built-in timer recording feature. This allows users to schedule recordings of their favorite shows, making it easier to capture content without the need for manual intervention. The intuitive interface, paired with a clear and easy-to-read display, simplifies the recording process and makes it accessible for users of all technical abilities.

Durability and design are also essential characteristics of the JVC HM-HDS1EU. Built to last, the device embodies solid construction and a stylish design, suitable for any home theater setup. The remote control functionality adds another layer of convenience, allowing users to operate the device from a distance.

In conclusion, the JVC HM-HDS1EU stands out as a robust video cassette recorder that seamlessly combines vintage and modern technology. Its S-VHS compatibility, user-friendly features, and superior recording capabilities make it an excellent choice for enthusiasts looking to preserve and enjoy their video collections. With this device, you can experience the nostalgia of classic tapes with the improved quality and usability that modern technology has to offer.
Top Page Image Contents