JVC HM-HDS1EU specifications 86 EN, When Receiving a Scrambled Broadcast

86 EN SUBSIDIARY SETTINGS (cont.)

Fine-Tuning Channels Already Stored

Perform steps A and C of “Manual Channel Set” on page 82 to access the Confirmation screen before continuing.

A Select the channel to fine-tune.

Press rt w e until the channel you want to tune begins blinking.

B Access the Manual Channel Set screen.

Press OK twice. The Manual Channel Set screen appears.

C Perform tuning.

Press e until “+/–” begins blinking, then press rt until the picture is its clearest. Then press OK.

●The Confirmation screen appears.

●Repeat steps A – C as necessary.

D Close the Confirmation screen.

Press MENU.

When Receiving A Scrambled Broadcast

A Select the decoder mode.

Set “L-2 SELECT” to “DECODER” ( pg. 65).

B Access the Confirmation screen.

Perform steps A and C of “Manual Channel Set” on page 82.

C Select the position.

Press rt w e to select the channel position broadcasting scrambled programmes, then press OK twice.

D Change the decoder setting.

Press e until “OFF” (decoder setting) begins blinking, and set it to “ON” by pressing rt.

E Return to the Confirmation screen.

Press OK.

●Repeat steps C – E as necessary.

F Close the Confirmation screen.

Press MENU.

INFORMATION

If you live in Eastern Europe, “TV SYSTEM” setting appears instead of “DECODER” setting on the Manual Channel Set screen. When you can see the picture but can hear no audio, select appropriate TV system (D/K or B/G). Normally, TV programmes are broadcasted as follows.

For Eastern Europe : D/K

For Western Europe : B/G

ASelect a country in Eastern Europe in step E on page 80.

BPress e until the TV system (D/K or B/G) blinking on the Manual Channel Set screen in step E on page 82.

CPress rt to select appropriate TV System (D/K or B/G).