JVC HM-HDS1EU specifications Programme Recording, Select the L-2 Select mode, Recording mode

Page 47

EN 47

Automatic Satellite

Programme

Recording

NOTE:

This function is available for the HDD deck only.

This function allows you to automatically record a satellite programme which is timer-programmed on your external satellite receiver. Connect a satellite receiver to the recorder’s AV2 (L-2) IN/DECODER connector and programme the timer on the satellite receiver. When the signals come into the recorder from the satellite receiver, the recorder automatically turns on and starts recording on HDD deck.

ATTENTION

●Be sure not to turn on the satellite receiver before the programme is executed; otherwise, the recorder will start recording when the satellite receiver’s power is turned on.

●If you have connected another appliance other than a satellite receiver to the AV2 (L-2) IN/DECODER connector, be sure not to engage the Automatic Satellite Programme Recording mode; otherwise, the recorder will start recording when the connected appliance’s power is turned on.

●Automatic Satellite Programme Recording and timer-recording cannot be done at the same time.

Before performing the following steps:

●Make sure the satellite receiver is connected to the recorder’s AV2 (L-2) IN/DECODER connector. ( pg. 70, 71)

●Programme the timer on the satellite receiver.

A Select the L-2 SELECT mode.

Set “L-2 SELECT” to “A/V” or “SAT” ( pg. 65).

●When you select “SAT”, refer to “IMPORTANT” on page 70.

B Set the recording speed.

Press MODE (p).

C Engage the Automatic Satellite Programme

Recording mode.

Press and hold SAT# for about 2 seconds. The SAT# button lights up.

NOTES:

●To disengage the Automatic Satellite Programme Recording mode, press SAT#.

●If the recorder’s power is off, it is not possible to engage the Automatic Satellite Programme Recording mode.

●In step C, if the SAT# button does not light but instead blinks quickly even though your satellite receiver’s power is off, Automatic

Satellite Programme Recording will not work properly with that satellite receiver*. If this is the case, perform “Express Timer Programming” ( pg. 44) to timer-record a satellite programme.

*Some satellite receivers output signals even if the power is off. Automatic Satellite Programme Recording is not possible with those satellite receivers.

●The SAT# button blinks while Automatic Satellite Programme Recording is in progress.

●For timer programming of the satellite receiver, refer to the instruction manual of the satellite receiver.

●Automatic Satellite Programme Recording is not possible if your satellite receiver does not have a timer.

●Pressing the recorder’s 1 button while Automatic Satellite Programme Recording is in progress turns off the recorder’s power and disengages the Automatic Satellite Programme Recording mode.

●If there are more than one satellite programmes you wish to record with Automatic Satellite Programme Recording, it is not possible to set different recording speeds for each programme.

●Depending on the type of satellite receiver, the recorder may not record a slight portion of the beginning of the programme or may record slightly longer than the actual length of the programme.

●If you engage the Automatic Satellite Programme Recording mode when the satellite receiver’s power is on, the recorder will not start Automatic Satellite Programme Recording even though the SAT# button blinks. When the satellite receiver shuts off once and is turned back on again, the recorder starts recording.

●You can also record a programme from your cable system in the same way if the system has a timer.

●Just Clock ( pg. 88) does not work when the Automatic Satellite Programme Recording mode is engaged.

●When the Automatic Satellite Programme Recording mode is engaged, or the recorder’s power is turned off after Automatic Satellite

Programme Recording is finished, the recorder will not enter the Timer mode even though “AUTO TIMER” is set to “ON” ( pg. 78).

Page 46 Page 48
Image 47
Page 46 Page 48
Contents HDD & S-VHS Video Recorder English Safety Precautions Do not block the recorder’s ventilation openings or holes For ItalyWhile using the recorder Precaution for Hard Disk DriveBefore installing the recorder Before using the recorderFront View Rear View Front Display Panel ON-SCREEN Display for HDD deck ON-SCREEN Display for VHS deck 10 EN Remote ControlRemote Control LCD How To UseConnect the recorder to TV Check the contents12 EN Situate the recorderVideo Connection 8To connect to a TV with S-VIDEO/AUDIO in connectorsSelect your country Auto Set Up14 EN Turn on the recorderPress rt to select Auto and press OK or e Perform Auto Set UpSelect the language Press rt to select your language codePress rt to select CH - and press OK or e Perform Preset Download16 EN Just Clock Language for the on-screen display18 EN LanguageMake connections Installing Satellite ControllerSituate the Satellite Controller Attach the Satellite Controller20 EN Setting satellite receivers brand and channelVCR Auto Standby Direct Rec TV Auto Power On22 EN Stop playback Basic PlaybackStart playback Pause playbackIcons and their meanings 24 ENConfirm that Index screen appears. Then, press t or OK Access the Index screenSelect the programmes Press NAVIGATION. The HDD Navigation screen appearsStop Live Memory Playback Live Memory Playback26 EN Start Live Memory PlaybackActivate frame-by-frame playback High-Speed SearchSlow Motion Pause during playback28 EN Set the recording duration Instant Timer Recording ITREngage the ITR mode Receiving Stereo and Bilingual ProgrammesSet the tape speed 30 ENLoad a cassette Select the VHS deckUsable cassettes Find the programme start point32 EN Playback with VCR NavigationSelect the programme Access the VCR Navigation screenSearch for the programme Load the cassette34 EN Stop Repeat Playback Index SearchNext Function Memory Activate Repeat PlaybackOverride automatic tracking Adjust the tracking manually36 EN Manual TrackingView Watching AnotherRecording Resume Function Accidental erasure preventionRetake 38 ENTape Remaining Time Press S-VHS ET on the recorder Engage the S-VHS ET modeOn-screen Display To Record Nicam Stereo and Bilingual ProgrammesRecording Playback42 EN Satellite Receiver Users Set the VPS/PDC modeEngage the recorder’s timer mode Set the category44 EN Express Timer ProgrammingClassics Comedy Drama VPS/PDC Recording46 EN Cancel or change a programmeReturn to the timer mode Disengage the timer mode. VHS deck onlyBefore performing the following steps Select the L-2 Select modeRecording mode Programme RecordingDisplay the code Change the remote control codeSet the remote control code 48 ENOperate the TV TV Multi-Brand Remote ControlTV PR +/-, TV %+/- Volume, TV Muting, number keys Set the TV brand codeOperate the satellite receiver Satellite Receiver Multi-Brand Remote Control50 EN Set the satellite receiver brand codeDisplay for editing About Hybrid NavigationDisplay for modification or deletion 52 EN Access the Navigation screenAccess the modify screen Modify InformationReturn to the Navigation screen Modify Programme TitleEnter new title Register new titleRegister new category 54 ENModify Category Select new categoryPress w e to select DELETE, then press OK Access the delete screenDelete Information Confirm the deletionEasy Dubbing from HDD deck to VHS deck Dubbing56 EN Press HDD. The Easy Dubbing screen appears again Insert a cassette with the record safety tab intactStart dubbing Prepare the VHS deck for dubbing 58 ENFrom HDD to VHS Prepare the HDD deck for dubbingPress 8. Then press S-VHSand press From VHS to HDD60 EN Access the edit screenAccess the R.A.Edit screen Return to R.A.Edit screen Access the Start Editing screenSelect other edit-in and edit-out points Start editingPlayer Audio and S-VIDEO input connectorsEdit From a Camcorder 62 ENStart the camcorder Set the recorder’s input modeSelect the recording deck Set the edit mode. VHS deck only64 EN Access the Input/Output Set screenSelect the input mode for the VIDEO/S Video connector Select SettingInput Setting Decoder connector66 EN Another Video RecorderRecorder Player CD player, etc Audio Dubbing68 EN Pre-recorded tape Audio-dubbed tapePress A.DUB Engage the Audio Dubbing modeEnd Audio Dubbing Satellite receiver Simple ConnectionsDecoder Perfect ConnectionsSet the tuner Select the input mode72 EN Connect the decoderMake connections Connecting/Using a Stereo SystemSelect the mode setting Mode SetAccess the HDD Set Up screen Select the modeTo record in VHS on an S-VHS cassette To record in S-VHSTo record in S-VHS ET on a VHS cassette To record in VHSFor Example VCR SET UP 1Entire programme while timer-recording in SP mode 76 ENPreference. Normally select Auto Correction to the luminance signal to enhance detailUsing this video recorder as the source player for editing On or OFF  pg78 EN VCR SET UP 2Enter the Guide Program number Showview System SetupGuide Program Number Set Guide Program NumberAuto Channel Set Access the Auto Channel Set screenTuner Set 80 ENPress OK twice Perform Auto Channel SetView the Confirmation screen Select the band Access the Confirmation screenManual Channel Set Select the channel positionDelete a Channel Select the new position 84 ENSet Stations B Set Stations a86 EN When Receiving a Scrambled BroadcastStation Name TV Station And ID List88 EN Access the Clock Set screenClock Set Start the clock operation Set the date and timeSet Just Clock Set the source channel position for clock data90 EN Recording cannot be started Insert a cassette, or using adhesiveTape, cover the hole where the tab Input mode is not correct Set the input mode to L-1, L-2 orCheck the programmed data and re 92 ENRemote control won’t operate Connect the fully-wired 21-pinRecorder when Preset Perform Preset Download againNAVIGATION.  pg 94 ENAppears when you stop setting timer programme Cancel a timer programme already set. pgTo set the timer programme, the clock must be set Timer programme. pg96 EN What happens if the tape runs out during recording? # remain lit on the front display panel. Is there a problem?98 EN S.T. Picture System Audio Dubbing Auto Channel Set Auto Set UpExpress Timer Programming Tape Position Indicator Tape Remaining TimeCountry code International telephone Language code

HM-HDS1EU specifications

The JVC HM-HDS1EU is a versatile and advanced video cassette recorder that embodies the combination of traditional tape recording and modern technology. This device is particularly notable for its ability to handle both S-VHS and VHS formats, making it an excellent choice for users who have a collection of tapes in both formats. The HM-HDS1EU allows for high-quality playback and recording, giving users the ability to enjoy their vintage media with impressive clarity.

One of the standout features of the HM-HDS1EU is its S-VHS ET (Extended Technology) capability. This innovation enhances the quality of VHS recordings by utilizing S-VHS technology, which results in a higher resolution and improved picture quality. The device also supports the advanced S-VHS recording standards that offer a more vibrant color palette and sharper images compared to standard VHS.

The HM-HDS1EU comes equipped with various input and output options that enhance its functionality. It features composite video and S-Video outputs, which provide users with flexibility in connecting to different display devices. The video stabilizer technology is particularly beneficial for users, ensuring smooth playback even on tapes that may have degraded over the years. By utilizing these outputs, users can easily integrate the recorder into their home entertainment systems.

Another important aspect of the HM-HDS1EU is its built-in timer recording feature. This allows users to schedule recordings of their favorite shows, making it easier to capture content without the need for manual intervention. The intuitive interface, paired with a clear and easy-to-read display, simplifies the recording process and makes it accessible for users of all technical abilities.

Durability and design are also essential characteristics of the JVC HM-HDS1EU. Built to last, the device embodies solid construction and a stylish design, suitable for any home theater setup. The remote control functionality adds another layer of convenience, allowing users to operate the device from a distance.

In conclusion, the JVC HM-HDS1EU stands out as a robust video cassette recorder that seamlessly combines vintage and modern technology. Its S-VHS compatibility, user-friendly features, and superior recording capabilities make it an excellent choice for enthusiasts looking to preserve and enjoy their video collections. With this device, you can experience the nostalgia of classic tapes with the improved quality and usability that modern technology has to offer.
Top Page Image Contents