Page 67
EN 67
A | | | B | | |
TV receiver | Player | Your recorder | Recorder | Your recorder | TV receiver |
AV mode | 21-pin SCART cable | | | 21-pin SCART cable | AV mode |
(not provided) | | |
| | | | (not provided) | |
| Another recorder | Another recorder | |
| | | |
| Recorder | | Player | | |
C | | | | | |
TV receiver | Recorder | Your recorder | | | |
| S-Video cable | | | | |
| (provided) | | | | |
| 21-pin SCART cable | | | | |
| (not provided) | | | | |
| Another recorder | | | |
| Player | | | | |
NOTES: | | | | | |
●All necessary cables can be obtained from your dealer.
●For Y/C signal input/output, be sure to use a 21-pin SCART cable that is compatible with the Y/C signal.
●When you select “EDIT” to dub tapes in step D, be sure to select “AUTO” (or “NORM” when “B.E.S.T.” is set to “OFF”) after you finish dubbing the tapes.
●When you use this recorder as the source player for editing, be sure to set “O.S.D.” to “OFF” before starting ( pg. 78).
●If you are using another recorder with S-Video and Audio input/output connectors, you can connect those connectors to this recorder’s S-VIDEO and AUDIO input/output connectors.
When using your recorder as the source player ...
... connect its rear panel S OUT and AUDIO OUT connectors to the recording deck’s S-Video and Audio input connectors. When using your recorder as the recording deck ...
... connect its front panel S-VIDEO and AUDIO input connectors to the source player’s S-Video and Audio output connectors. Then, set the recorder’s input mode to “F-1”, and set “F-1 INPUT” to “S-VIDEO” ( pg. 65).
Contents
HDD & S-VHS Video Recorder English
Safety Precautions
Do not block the recorder’s ventilation openings or holes
For Italy
While using the recorder
Precaution for Hard Disk Drive
Before installing the recorder
Before using the recorder
Front View
Rear View
Front Display Panel
ON-SCREEN Display for HDD deck
ON-SCREEN Display for VHS deck
10 EN
Remote Control
Remote Control LCD
How To Use
Connect the recorder to TV
Check the contents
12 EN
Situate the recorder
Video Connection
8To connect to a TV with S-VIDEO/AUDIO in connectors
Select your country
Auto Set Up
14 EN
Turn on the recorder
Press rt to select Auto and press OK or e
Perform Auto Set Up
Select the language
Press rt to select your language code
16 EN
Perform Preset Download
Press rt to select CH - and press OK or e
Just Clock
Language for the on-screen display
18 EN
Language
Make connections
Installing Satellite Controller
Situate the Satellite Controller
Attach the Satellite Controller
20 EN
Setting satellite receivers brand and channel
VCR Auto Standby Direct Rec
TV Auto Power On
22 EN
Stop playback
Basic Playback
Start playback
Pause playback
Icons and their meanings
24 EN
Confirm that Index screen appears. Then, press t or OK
Access the Index screen
Select the programmes
Press NAVIGATION. The HDD Navigation screen appears
Stop Live Memory Playback
Live Memory Playback
26 EN
Start Live Memory Playback
Activate frame-by-frame playback
High-Speed Search
Slow Motion
Pause during playback
28 EN
Set the recording duration
Instant Timer Recording ITR
Engage the ITR mode
Receiving Stereo and Bilingual Programmes
Set the tape speed
30 EN
Load a cassette
Select the VHS deck
Usable cassettes
Find the programme start point
32 EN
Playback with VCR Navigation
Select the programme
Access the VCR Navigation screen
Search for the programme
Load the cassette
34 EN
Stop Repeat Playback
Index Search
Next Function Memory
Activate Repeat Playback
Override automatic tracking
Adjust the tracking manually
36 EN
Manual Tracking
View
Watching Another
Recording Resume Function
Accidental erasure prevention
Tape Remaining Time
38 EN
Retake
Press S-VHS ET on the recorder
Engage the S-VHS ET mode
On-screen Display
To Record Nicam Stereo and Bilingual Programmes
Recording
Playback
42 EN
Satellite Receiver Users
Set the VPS/PDC mode
Engage the recorder’s timer mode
Set the category
44 EN
Express Timer Programming
Classics Comedy Drama
VPS/PDC Recording
46 EN
Cancel or change a programme
Return to the timer mode
Disengage the timer mode. VHS deck only
Before performing the following steps
Select the L-2 Select mode
Recording mode
Programme Recording
Display the code
Change the remote control code
Set the remote control code
48 EN
Operate the TV
TV Multi-Brand Remote Control
TV PR +/-, TV %+/- Volume, TV Muting, number keys
Set the TV brand code
Operate the satellite receiver
Satellite Receiver Multi-Brand Remote Control
50 EN
Set the satellite receiver brand code
Display for modification or deletion
About Hybrid Navigation
Display for editing
52 EN
Access the Navigation screen
Access the modify screen
Modify Information
Return to the Navigation screen
Modify Programme Title
Enter new title
Register new title
Register new category
54 EN
Modify Category
Select new category
Press w e to select DELETE, then press OK
Access the delete screen
Delete Information
Confirm the deletion
56 EN
Dubbing
Easy Dubbing from HDD deck to VHS deck
Start dubbing
Insert a cassette with the record safety tab intact
Press HDD. The Easy Dubbing screen appears again
Prepare the VHS deck for dubbing
58 EN
From HDD to VHS
Prepare the HDD deck for dubbing
Press 8. Then press S-VHSand press
From VHS to HDD
Access the R.A.Edit screen
Access the edit screen
60 EN
Return to R.A.Edit screen
Access the Start Editing screen
Select other edit-in and edit-out points
Start editing
Player
Audio and S-VIDEO input connectors
Edit From a Camcorder
62 EN
Start the camcorder
Set the recorder’s input mode
Select the recording deck
Set the edit mode. VHS deck only
64 EN
Access the Input/Output Set screen
Select the input mode for the VIDEO/S Video connector
Select Setting
Input Setting
Decoder connector
66 EN
Another Video Recorder
Recorder Player
CD player, etc
Audio Dubbing
68 EN
Pre-recorded tape Audio-dubbed tape
End Audio Dubbing
Engage the Audio Dubbing mode
Press A.DUB
Satellite receiver
Simple Connections
Decoder
Perfect Connections
Set the tuner
Select the input mode
72 EN
Connect the decoder
Make connections
Connecting/Using a Stereo System
Select the mode setting
Mode Set
Access the HDD Set Up screen
Select the mode
To record in VHS on an S-VHS cassette
To record in S-VHS
To record in S-VHS ET on a VHS cassette
To record in VHS
For Example
VCR SET UP 1
Entire programme while timer-recording in SP mode
76 EN
Preference. Normally select Auto
Correction to the luminance signal to enhance detail
Using this video recorder as the source player for editing
On or OFF pg
78 EN
VCR SET UP 2
Enter the Guide Program number
Showview System Setup
Guide Program Number Set
Guide Program Number
Auto Channel Set
Access the Auto Channel Set screen
Tuner Set
80 EN
View the Confirmation screen
Perform Auto Channel Set
Press OK twice
Select the band
Access the Confirmation screen
Manual Channel Set
Select the channel position
Delete a Channel
Select the new position
84 EN
Set Stations B
Set Stations a
86 EN
When Receiving a Scrambled Broadcast
Station Name
TV Station And ID List
Clock Set
Access the Clock Set screen
88 EN
Start the clock operation
Set the date and time
Set Just Clock
Set the source channel position for clock data
90 EN
Recording cannot be started
Insert a cassette, or using adhesive
Tape, cover the hole where the tab
Input mode is not correct Set the input mode to L-1, L-2 or
Check the programmed data and re
92 EN
Remote control won’t operate
Connect the fully-wired 21-pin
Recorder when Preset
Perform Preset Download again
NAVIGATION. pg
94 EN
Appears when you stop setting timer programme
Cancel a timer programme already set. pg
To set the timer programme, the clock must be set
Timer programme. pg
96 EN
What happens if the tape runs out during recording?
# remain lit on the front display panel. Is there a problem?
98 EN
S.T. Picture System
Audio Dubbing Auto Channel Set Auto Set Up
Express Timer Programming
Tape Position Indicator Tape Remaining Time
Country code
International telephone Language code