Switching the Lock on | Sim2 Multimedia RTX 55TV specs

•“DELETE” (in yellow)

This function can be used to remove an unwanted channel from the table: in reality, the channel is simply moved to the last programme number (99).To delete a channel, proceed internally of the Overview menu as follows:

1)Scroll through the list of programmes and select the one you want to delete.

2)Press the yellow button [4] on the remote control to delete the selected channel.

Example: if the channel to be deleted is associated with number 2, once removed, the channels stored under higher numbers will all shift down by one. In other words, the channel stored previously as programme number 3 becomes 2, the previous number 4 becomes 3, and so on.

•“LOCK” (in blue)

This function allows you to prevent selected channels from unauthorised viewing (by children, for example). The operation of programming this function involves two distinct steps:

A)selection of the channel to be locked out;

B)switching the Lock on (or off)

To lock out a channel, proceed as follows:

A)Highlight the channel:

First of all, select the channel you want to lock against viewing. Display the Overview sub-menu on th screen and proceed as follows:

1)Scroll through the table of channels and select the one you want to lock out.

2)Press button [3] on the remote control to mark its programme number in blue. To deactivate the marker, select it and press the blue button a second time.

Note:To mark other channels, repeat the entire procedure descri- bed above. In any event, the entire procedure of step A can be performed at any given moment, independently of step B.

B) Switching the Lock on:

Step A of this procedure only SELECTS the channels you intend to lock out. It does not activate the Lock function.To render Lock status for the channels selected in step A above fully active (ON) or inactive (OFF), proceed as follows:

1)Press the TV button [21] to exit the Overview menu (if di- splayed)

2)Press the yellow button [4] to display the Main Settings menu.

3)Scroll through the menu to “Setup”.

4)Scroll through the menu to “Lock code”.

5)Using the number buttons [2] of the remote control, enter a secret three-digit code.

CAUTION:You will need to enter this code again to switch the lock OFF, so it is good policy to make a note of the number by entering it in the space below, since it will no longer be visible once the function is activated. MY CODE (3 digits):

I . . . .I . . . .I . . . .I

6)Exit this menu and go to the “Other” menu

7)Scroll through the menu to “Lock”, and ﬁnally, using the number buttons [2] of the remote control, enter your 3-digit secret code. The “Off” caption disappears and, as the code is entered, 3 asterisks “* * *” will appear in its place;having entered the code, the caption “On” appears to conﬁrm that the Lock is activated.

C) Switching the Lock off:

Repeat steps -06- and -07- of the procedure described above, entering the same 3-digit secret code that was used to activate the function.

“Note”: When the Lock is ON, it not only disallows viewing of the channels selected in the Overview menu but also prevents access to the Setup sub-menu, which contains your secret code. The Lock must be switched off as described above before this sub-menu can be accessed again.