Sim2 Multimedia RTX 55TV Automatic shut-down, Switching off completely, On Screen Display, Help

Automatic shut-down

The RTX 55TV is equipped with a safety feature ensuring that in the absence of a television broadcast signal (for example late at night when certain channels close down and ʻsnowʼ appears on the screen), the internal circuits will switch automatically to stand-by after about 15 minutes.

Switching off completely

To switch off the appliance completely (and isolate it from the power supply, for example at the end of a dayʼs viewing), simply press the main power switch [32] Fig.7.

Switching off power is not only advisable for reasons of safety. It also has the advantage of saving electricity.

Note: In addition to the ways of switching off described above, there is also the option of setting a timer to switch off the ap- pliance automatically after a programmed delay. Details of how to use this function are given further on in the manual.

ON SCREEN DISPLAY

Your RTX 55TV is equipped with an On Screen Display (OSD) system that will generate a series of video pages on the screen, superimposed on the television picture, containing menus and sub-menus; these are organised so as to group together similar functions (referred to as options), which you the user can se- lect and set up as you want to suit your personal viewing and listening preferences.

Before looking in detail at the individual options and settings of each menu, this section provides a general overview of the menus that will give an understanding of how they are structured and what they do.

The procedures for displaying a menu on the screen and performing the various steps of selecting options and making settings are the same for all menus and sub-menus.

Figures 8 and 9 show how to use the OSD quickly and ea- sily from the remote control and the cabinet controls. From here on, therefore, the individual steps involved in accessing a given menu, selecting options and/or setting values will not be repeated every time in the directions.

Selecting the OSD language

Before reading further through this manual, select a preferred language for the OSD, so that this can be used to display all the relative messages, prompts and information on your screen.

This will ensure that you understand the information contained in the functions, and help you to use it more efficiently.

To select the language, proceed as follows:

1)Display the Main Settings menu.

2)Select “Setup” and confirm: the Setup sub-menu appears on the screen.

3)Select “Language” and choose the language in which you

want to display all OSD information.

The languages available are: “Italiano”, “English”, Français”, “Deutsch” and “Español”.

Help

To remind yourself of the main operating buttons and their fun- ctions, press button [17] on the remote control twice to display the two Help pages, on which this information is represented graphically. To exit the Help function, press the TV button [21] on the remote control.

? Help
	Soun Ratiod	Image
	Main Set.	Others
MENU Main Settings
	Selection
-	+ Adjustment
	Selection
TV	Exit
AV Source		Off
	Mute
	Aspect Ratio	Back	Fig.8

?Help TV Exit

TXT Videotext Text Mix

iIndex page ? Reveal text

Page enlarge

Page hold

Sub-page

xPage cancel

Call-up pages Fig.9

17