5 OPERATION IN GRAPHIC MONITOR MODE
The operation of the RTX 55TV as a graphic monitor is piloted by signals received from the DB15 socket (AV Graphic unit) or 32 KHz signals (RGB + Sync or YCbCr) received from the socket ports of the AV DVD unit.
Once the RTX 55TV has been connected to external applian- ces (e.g. computer, video games console etc.), by plugging the relative cables into the sockets, you can display the video signal from the required source by selecting the corresponding socket from the OSD.
This input selection procedure is done internally of the TV Connections menu, which will be displayed by pressing the AV button [10] on the remote control. Select “Graphic Mode” and confirm: the following
VGA(DB15)
Select and confirm the socket to which the external appliance has been connected.
The basic operating steps such as switching on and off, selecting
the signal source, adjusting the audio volume and using the OSD are the same in Graphic Monitor mode as in Television mode. Accordingly, reference can be made to the instructions for ope- rating the appliance in TV mode.
THE REMOTE CONTROL
In GRAPHIC MONITOR mode, the remote control can be used to display the three menus dedicated to the various settings, and to adjust the speaker volume.When consulting this chapter, refer to the remote control summary table (Fig. 8).
FUNCTION BUTTONS ON THE CABINET
The function buttons of the RTX 55TV cabinet controls have no effect in Graphic Monitor mode.
30