Sim2 Multimedia RTX 55TV Important Information on Safety, Be careful with cables

Page 6

2 IMPORTANT INFORMATION ON SAFETY

CAUTION! RISK OF ELECTROCUTION: DO NOT OPEN! This symbol warns of the risk involved in removing the rear cover. Whatever the reason, the rear cover must be removed only by a qualified and authorised service te- chnician. To reduce the risk of electrocution, disconnect the power cable from the rear panel before removing the rear cover of the appliance.

This symbol warns that there is a danger of electric shock from touching certain live parts inside the cabinet.

This symbol indicates the inclusion in the manual of important instructions that must be read before operating or maintaining the appliance.

NOTES ON SAFETY

Read this manual and keep it safe

This manual contains important information on how to install and operate the RTX 55TV. Before using the appliance, read the safety notes and the directions, which must be observed conscientiously. Keep this manual safe for future reference.

Entrust servicing and repairs to specialist technicians. Have all repair work done by authorised service technicians only. The involvement of a technician will be required if the appliance has suffered damage of any kind, for example if the

power cable or the plug has been damaged, if liquids or solid objects have spilled over or fallen onto the cabinet, or if the appliance has been exposed to rain or damp, or dropped, or is simply not working as it should.

Connect the appliance only to the type of power supply indicated

Connect the RTX 55TV to a mains power supply rated 220V ±10%, 50/60 Hz and equipped with an earth system. The power cable of the appliance is equipped with a three pin plug incorporating the earth connection. Accordingly, make sure that the power socket and the mains supply where the appliance is to be installed are wired with earth connections, so that this protection is not lost. If in doubt, consult a qualified electrician. Take care to avoid overloading the power socket and any extension leads.

Be careful with cables.

Arrange cables in such a way that they will not cause any obstruction. Keep cables out of the reach of small children. Install the RTX 55 TV as near as possible to the wall power socket. Avoid stepping on power cables, make certain they do not become tangled, and never jerk or tug; do not expose them to sources of heat, and make certain they do not become knotted or kinked, especially near to plugs and connectors or to the point where they leave the RTX 55TV cabinet. If cables become damaged in any way, contact your nearest Service Centre. Do not plug in or switch on the appliance using a defective cable.

Disconnecting the appliance from the power supply. The appliance is isolated from the power supply by removing the plug from the power socket. When installing the appliance, make sure that the plug end of the cable and the mains power socket are easily accessible. To disconnect the appliance from the power supply, pull out the plug. Do not tug the cable.

Disconnect the RTX 55TV during thunderstorms or when not in use.

To prevent lightning strikes near your home from damaging the appliance, disconnect it from the power supply during thunder- storms or whenever it is not going to be used for any length of time.In these cases, it is advisable to remove the plug from the power socket and disconnect the aerial cable as well (Fig. 2). When switching off the appliance overnight,rather than leaving it in standby, switch it off at the main power switch ([32] Fig. 7).

6

Image 6
Contents Look Forward Page Introduction Dear CustomerOperation in Graphic Monitor Mode Appendix InstallationOperation of the Appliance TV Mode SummaryPresentatation of the RTX 55TV Important Information on Safety Be careful with cablesPositioning the RTX 55TV System Cleaning the AppliancePrecautions Regarding the Remote CON- Trol Care for the EnvironmentConnecting to External Appliances InstallationConnecting the Appliance to the Mains Power Supply Unpacking and ConnectionsAV 3 socket Cinch Video Aerial socketAV 1 Scart 1 and AV 2 Scart 2 sockets AV 3 Y/C socketAV Graphic RGB socket Subwoofer socketHI-FI sockets right and left channels ANT E NNA AV1 AV2 Operation of the Appliance in TV Mode Remote ControlButton TXT OSD OSDSub-menus from OSD menus when Reduces volume Switching on in stand-by Switching off to stand-by Switching on video and audio systemsSwitching on and OFF Function Buttons on the RTX 55TV CabinetOn Screen Display Switching off completelyAutomatic shut-down HelpUsing the Remote Control to Navigate the OSD Cabinet ControlsProcedure for Making Adjustments and Activating Options Navigating Through OSD MenusTuning and Programming TV Mode Selecting the AUDIO-VIDEO SourceLooping TWO Sockets Together Tuning and storing channels automatically Personalising the channels table Hide in redSwitching the Lock on Switching the Lock offSound menu adjustments Sound AdjustmentsAdjusting the volume Muting the TV soundAdvanced audio settings Video Adjustments 100 Hz 330 Hz 1000 Hz 3300 Hz 10000 HzVideo menu functions Colour temperature value in degrees Kelvin Other Functions Waiting for a page to appear Selecting sub-pagesHolding a Enlarging the textOperation in Graphic Monitor Mode Function Buttons on the CabinetButton Graphic Monitor Picture Menu Image menuSetup Setup menuOSD Summary Table Television mode AppendixImage First touchButton 3OTHER Functions Others Button 4 Main Settings Tuning StartButton 5 Image Video Exit Image Main Set OthersAdditional Information Technical Specifications OpticalGeneral Dimensions ElectronicsSIM2 Multimedia is certified by