|
| Troubleshooting |
|
| |
| ∙ Check for possible sources of interference. | |
Poor Reception on Some Channels | ∙ | The channel or cable TV broadcast is experiencing problems. Tune to another channel. |
| ∙ Make sure that channels are set into memory | |
| ∙ The network signal is weak. Adjust the antenna to receive a better reception | |
| ∙ Check for possible sources of interference. | |
The Remote Control does not work | ∙ | Batteries may be weak, dead, or inserted incorrectly. |
| ∙ Point the remote control directly at the IR sensor on the TV with an angle of 35 degrees. | |
| ∙ Remove any obstacles between the remote control and the TV. | |
| ∙ Remote control is out of range. Move closer to the TV. | |
TV Shuts Off | ∙ | Sleep timer is set. |
| ∙ | Power is interrupted. |
No CATV Reception | ∙ | Check all cable TV connections. |
| ∙ Set the TV Mode in Channel menu. | |
Closed Caption is not activated | ∙ | The channel/program is not a closed caption broadcast. Try another channel. |
| ∙ Enable Closed Caption in the Menu. | |
|
| 52 |