JVC AV28CH1EU Additional Menu Operations, Using the ACI function, Downloading the data to VCR

ADDITIONAL MENU OPERATIONS

■Using the ACI function

This TV has an ACI function which decodes the ACI (auto- matic Channel Installation) data.

Using the ACI function allows all TV channels transmitted from the cable TV station to be properly registered quickly ac- cording to the data from the cable TV station.

Caution:

•If your cable TV station broadcasts ACI data and if “ACI START/ACI SKIP” appears in the AUTO PROGRAM menu, the ACI function is enabled. In all other cases, it is disabled.

1Press the 6 button to choose ACI START. Then press the abutton to start the ACI function.

When you don't want to use the ACI function:

Press the 6 button to choose ACI SKIP and then press the abutton.

If the AUTO PROGRAM menu changes to another menu:

Depending on your cable TV station, there may be a broadcast selection menu set up by the cable TV station.

Follow the menu indications and use the 5 and 6 buttons to operate the menu. After you have made the setting, press the abutton.

If “ACI ERROR” is displayed in the AUTO PROGRAM menu:

“ACI ERROR” denotes that the ACI function is not work- ing properly. Press the abutton to start the ACI func- tion again.

If “ACI ERROR” still appears even after you have tried to start the ACI function several times, press the 3 button to start the AUTO PROGRAM function. It does not cause any problem because all the TV channels are registered to the Programme numbers (PR) by the AUTO PRO- GRAM function.

2When the settings are completed, the EDIT menu is displayed. Return to the instruc- tions that you were reading before, and continue the operation.

When the “Initial Settings” has been made:

Return to step 6 of “Initial Settings” on page 4.

When the “AUTO PROGRAM” has been made:

Return to step 4 of “AUTO PROGRAM” on page 23.

Note:

•If you have any questions about the items in the Broadcast Selection menu or how to operate the menu, please contact your cable TV station.

•When the cable TV broadcast reception is poor, the ACI function will not work properly.

•If there is an error in the ACI data itself, the TV chan- nel cannot be registered properly. If this happens, turn the ACI function off (ACI SKIP) and use the AUTO PROGRAM function. Alternatively, use the EDIT/MANUAL function to correct the Programme number (PR) setting.

■Downloading the data to VCR

You can transmit to the latest Programme numbers (PR) data to the VCR with the T-V LINK function.

Caution:

•Only when the T-V LINK compatible VCR is connected to

the EXT-2 terminal, this operation is enabled.

•Only when the T-V LINK menu is being displayed, this oper- ation is enabled.

		ENGLISH
T-V LINK
DOWNLOAD TV	VCR

BACK

TV OK

EXIT

D0005-EN

1Turn on the VCR.

2Press the a button.

The data transmission begins.

DOWNLOAD TV VCR

TRANSFER. . . . .

D0037-EN

The T-V LINK menu disappears once the data transmis- sion ends.

When the T-V LINK menu is changed over to another menu:

The menu operation at the TV side is completed and it is shifted to the menu operation at the VCR side. Refer to the VCR Instruction Manual and operate the VCR.

Note:

•If “FEATURE NOT AVAILABLE” appears at the T-V

LINK menu, ensure the following three items are cor- rect; then press the a button to retry data trans- mission.

−Has the T-V LINK compatible VCR been connect- ed to the EXT-2 terminal?

−Has the VCR power been turned on?

−Does the SCART cable that is connected to the EXT-2 terminal to T-V LINK compatible VCR have all proper connections?

■Changing the COUNTRY set- ting

After the AUTO PROGRAM function is completed, you can change the country you have already set by using the AUTO PROGRAM function.

When registering the TV channels for French broadcast sta- tions (SECAM-L system), perform this operation to change the country.

1Display the INSTALL menu.

When the EDIT menu is currently being dis- played:

Press the h (Information) to return to the INSTALL menu.

27