JVC AV28CH1EU manual Link Functions, Pre-set Download, Direct Rec, TV Auto Power On/VCR Image View

Page 6

T-V LINK FUNCTIONS

When a T-V LINK compatible VCR is connected to the EXT-2 Terminal on the TV, it is easier to set up the VCR and to view videos. T-V LINK uses the following features:

To use T-V LINK functions:

A T-V LINK compatible VCR is necessary.

The VCR must be connected to the EXT-2 terminal on the TV by a fully wired SCART cable.

Note:

•A “T-V LINK compatible VCR” means a JVC VCR with the T-V LINK logo or a VCR with one of the following logos. However, these VCRs may support some or all of the fea- tures described below. For details, refer to your VCR in- struction manual.

“Q-LINK” (a trademark of Panasonic Corporation) “Data Logic” (a trademark of Metz Corporation) “Easy Link” (a trademark of Phillips Corporation) “Megalogic” (a trademark of Grundig Corporation) “SMARTLINK” (a trademark of Sony Corporation)

■Pre-set Download

Download the registered data on the TV channels from the TV to the VCR.

The Preset Download function automatically begins when the initial setting is complete or whenever the AUTO PROGRAM or EDIT/MANUAL operations are performed.

Note:

•This function can be operated via VCR operation.

When “FEATURE NOT AVAILABLE” is displayed:

If “FEATURE NOT AVAILABLE” is displayed, the download was not performed correctly. Before trying to download again, ensure the following:

•The VCR power is turned on.

•The VCR is T-V LINK compatible.

•The VCR is connected to the EXT-2 terminal.

•The SCART cable is fully wired.

■Direct Rec

“What You See Is What You Record”

You can record to VCR the images that you are currently viewing on TV by a simple operation.

For details, read the manual for your VCR.

Operate via the VCR. “VCR IS RECORDING” is displayed.

In the following conditions, the VCR will stop recording if the TV is turned off, if the TV channel or input is switched, or if the menu is displayed on the TV:

•When recording images from an external device connected to the TV.

•When recording a TV channel after it has been unscrambled on a decoder.

•When recording a TV channel by using the TV’s output be- cause that TV channel cannot be properly received on the VCR’s tuner.

Note:

•Operation via the TV is not possible.

•Generally, the VCR cannot record a TV channel that can- not be received properly by the VCR’s tuner, even though you can view that TV channel on the TV. However, some VCRs can record a TV channel by using the TV’s output if that channel can be viewed on the TV, even though the TV channel cannot be received properly by the VCR’s tuner. For details, refer to your VCR instruction manual.

■TV Auto Power On/VCR

Image View

When the VCR starts playing, the TV automatically turns on and the images from EXT-2 terminal are displayed on the screen.

When the VCR menu is operated, the TV automatically turns on and the images from EXT-2 terminal are displayed on the screen.

Note:

•This function does not operate if your TV’s main power is turned off. Set your TV’s main power to on (standby mode).

ENGLISH

5

Page 5 Page 7
Image 6
Page 5 Page 7
Contents AV28CH1EU Contents Putting Batteries into the Remote Control Connecting the Aerial and VCRConnecting the power cord to the AC outlet PreparationInitial Settings Press the Main power button on the TVWhen a T-V Link compatible VCR is not con- nected To cancel the Auto Program functionWhen not using the EDIT/MANUAL function When a T-V Link compatible VCR is connectedLink Functions TV Auto Power On/VCR Image ViewWhen Feature not Available is displayed Pre-set DownloadBasic Operation Turn the Main power onTurn the TV on from standby mode Choose a TV channelTo return to a TV channel Adjust the volumeWatch images from external Devices To use the Programme number PR 0 AVOperating with the buttons on the TV Behind the CoverMuting Button Number ButtonsZoom Button Adjusting the visible area of the pic- ture Choose the Zoom modeHyper Sound Button Standby Button = VCR/DVD Control Buttons VCR P DVD SwitchInformation Button Colour ButtonsBasic operation ~ Teletext Control Buttons and VCR P DVD SwitchUsing the List Mode Press and hold down AStore buttonSize CancelHold Sub-pageMenu Operation Press the a button to display Menu main menuTint Picture SettingPicture Adjustment Press the a button to complete the set- tingsDigital VNR Picture FeaturesPress the 5 buttons to choose a setting Colour SystemAuto Aspect Stereo / I Sound SettingSound Adjustment Hyper SoundEXT Setting S-VIDEO inputID List Press the 6 buttons to choose an EXT terminal or TV DubbingPress the 5 buttons to choose the arrow from the menu EXT-1/EXT-3/EXT-4Blue Back FeaturesSleep Timer Child LockPress the 6 buttons to choose a TV channel Decoder EXT-2To view a locked TV channel Press the blue button and set the Child Lock functionInstall LanguageAuto Program Install EDIT/MANUALPress the 6 buttons to choose a new Programme number PR Press the 3 button to start the Move funcTion Channel name list Press the red button to start the ID func- tionPress the blue button to activate the MAN- UAL function Press the green button and start the IN- Sert functionPress the yellow button to delete the TV channel Press the green or red button to search for TV channelDownloading the data to VCR Using the ACI functionAdditional Menu Operations Changing the Country set- tingTo cancel the Decoder EXT-2 function Using the Decoder EXT-2 FunctionTurn on the Decoder power To return to the Install menu from the Country menuConnecting the external devices Before connecting anythingAdditional Preparation Link compatible VCR Connecting headphonesVideo/sound signal output from the EXT-2 terminal TV output from the EXT-1 terminalCH/CC Number ChannelTV Buttons and Parts Front PanelRear Panel Troubleshooting Other concerns Specifications Design and specifications subject to change without noticeModel Victor Company of JAPAN, Limited
Top Page Image Contents