JVC LT-37X898, LT-42X898 manual AV Receiver

Quick Setup

Connecting to an AV Receiver using your television's V3 Smart Input

By connecting your AV Receiver to your television's V3 Smart Input, you can watch picture sources from many different devices, without having to change or use the other input connections on your TV. This allows you to free up the other input connections so you can connect more devices to your television.

R	-
	AUDIO - L
TV Rear Panel
	Y
PR
3	PB
INPUT
S-VIDEO
	VIDEO

AV Receiver

MONITOR	PR
OUT
	PB
	Y
	MONITOR

UDIO AUDIOOUT OUTUDIOFOROUTHDMI 1

R	-	AUDIO		-
					L
R	AUDIO		INPUT
					L
R	-	AUDIO		-
					L

1)Connect an S-Video Cable from the AV Receiver's MONITOR OUT to the S-Video INPUT-3 on the back of the TV.

2)Connect a Yellow Composite Cable from the AV Receiver's MONITOR OUT to the VIDEO INPUT-3 on the back of the TV.

3)Connect a Green Component Cable from the AV Receiver's Y MONITOR OUT to the Y VIDEO INPUT-3 on the back of the TV.

4)Connect a Blue Component Cable from the AV Receiver's PB MONITOR OUT to the PB VIDEO INPUT-3 on the back of the TV.

5)Connect a Red Component Cable from the AV Receiver's PR MONITOR OUT to the PR VIDEO INPUT-3 on the back of the TV.

Notes:

•Please refer to your AV Receiver instruction manual for more information on connecting your speakers and other devices like a DVD player.

•Use your AV Receiver's remote to switch to the different devices you have connected.

•Some AV Receivers may not respond when the V3 Smart Input function is turned on.

•If you have video connections for each input device connected to your AV Receiver, you should not connect them using both S-Video and Composite connection at the same time when you are using V3 Input as the V3 Smart Input. In this case we recommend using the S-Video connection.

21