Button Functions
Return +/TV
The RETURN+/TV button has three functions:
Return - Returns to the channel viewed just before the channel currently onscreen.
Return+ - Lets you program a specific channel to return to while scanning through the channels using the CH+ and CH– buttons.
TV - Returns to the TV mode.
Press the RETURN+/TV and hold for three seconds
RETURN CHANNEL
PROGRAMMED!
The channel currently active has been programmed as your return+ channel. Now scan
through the channels using the CHANNEL+/– buttons.
Press the RETURN+/TV
You will return to your programmed channel.
•To cancel your return+ channel, press and hold the RETURN+/TV button for three seconds. The message “RETURN CHANNEL CANCELLED!” will appear.
•Return+ works only with the Channel+/– buttons. Pressing any number key will cancel return+.
Light
All remote control buttons are illuminated, except for the Light button. Press the LIGHT button to turn the illumination on for 5 seconds.
Menu
The MENU button allows you to access JVC’s onscreen menu system. Press MENU to activate the onscreen menu system. When a menu is displayed, press the MENU button to exit.
• See individual topics like “Sound Adjust” for specific information on using menus.
OK
This button confirms your selection when you are in one of the onscreen menus.
Back
This button allows you to go back in the menu to change a selection or correct a mistake.
60