Picture Adjust Menus
Theater Pro II
It is possible to use Theater Pro II menu only when the Video Status mode is set to THEATER. It adjusts the detailed picture settings.
Theater Pro II Menu | Settings |
DSD Detail | Shows the edge of the picture clearly |
H.SHARP | Emphasizes the edge of the picture horizontally |
V.SHARP | Emphasizes the edge of the picture vertically |
DSD NOISE CONTROL | Reduces picture noise |
COLOR TEMPERATURE | Adjusts the screen (red, blue or green) color |
(RED, BLUE, GREEN) |
|
COLOR BALANCE | Adjust the blue color naturally |
*COLOR MNGMT. | Select a corrected color |
(RED, YELLOW, GREEN, CYAN) AXIS |
|
*COLOR MNGMT. | Adjusts the tints of (red, yellow, green or cyan) |
(RED, YELLOW, GREEN, CYAN) TINT |
|
*COLOR MNGMT. | Adjusts the color of (red, yellow, green or cyan) |
(RED, YELLOW, GREEN, CYAN) COLOR |
|
*COLOR:BRIGHT AREA | Adjusts the picture color of the bright areas |
*COLOR:DARK AREA | Adjusts the picture color of the dark areas |
|
|
* These Theater Pro II menus cannot be selected when Color Management is OFF. See page 51.
Press the MENU button
π† To THEATER PRO II √® To enter
π† Select a Theater Pro II menu √® To adjust the settings
Press the MENU button when finished
Reset
Reset resets all picture adjustments except for Natural Cinema at once to the default settings.
Press the MENU button
π† To RESET
Press the OK button
The onscreen menu disappears for a moment, and then the settings are reset to the default setting for all the picture adjustments except for NATURAL CINEMA.
Press the MENU button when finished
PICTURE ADJUST
| PREVIOUS | STANDARD |
|
|
|
|
|
|
|
| DIGITAL VNR |
| AUTO |
|
| MPEG NR |
| ON |
|
| SMART SENSOR |
| OFF |
|
| SENSOR EFFECT |
| OFF |
|
| THEATER PRO II |
|
|
|
| RESET |
|
|
|
| NEXT PAGE |
| (3/3) |
|
| SELECT | OPERATE | MENU EXIT |
|
54