Button Functions
Power
Turns the TV on or off.
Press the POWER button
Number Buttons - 10Key Pad
Use the number buttons on the remote control to move directly to a specific channel. For example, to move to channel 12:
1 (One)
2 (Two)
Tune
Lets you decide the input channel and select it. After you press the number buttons on the remote, press the TUNE button. For example, to move to channel 12:
1 (One)
2 (Two)
Press the TUNE button
Sub Channel
The main channel sometimes has minor channels (Sub Channels). By using the SUB CH button, you can select a sub channel easily.
At first, select TV or STB mode to use the Sub channel function. See page 68.
To watch sub channels
For example, to move to sub channel
Press 1, 2 and 3 in order
Press the SUB CH button
Press 4 and 5 in order
Press the TUNE button
Note:
•If there are more than 2 major channels, select the digital channel by using the π† buttons and then press the OK button.
Channel +/–
Use these buttons to move up or down all the available channels your TV is able to receive. To move rapidly through the channels using JVC’s Hyperscan feature, press and hold CH+ or
58