Kramer Electronics FC-5 user manual Erasing a Command from the Command Translation List Window

Feature	Function
Properties	Defines the command NAME
NAME Field	Lets you type over alternative text of up to 17 characters or leave the
	field blank
Properties	Defines the new EVENT. Lets you change the selection via the
EVENT Field	drop-down list box:
	COM1 RECEIVE, COM2 RECEIVE, DRYCONTACT_01 to
	DRYCONTACT_11
Properties	Defines the new ACTION. Lets you change the selection via the
ACTION Field	drop-down list box:
	COM1 TRANSMIT, COM2 TRANSMIT, RELAY_01 ON, RELAY_02 ON,
	RELAY_01 OFF, RELAY_02 OFF
Clear Button	Removes the data that is entered in all the text boxes
Apply Button	Saves any changes made
	Lets you continue to make changes in the Edit Command window
OK Button	Saves any changes made and closes the Edit Command window
Close Button	Closes the New Command window

5.2.3Erasing a Command from the Command Translation List Window

To erase a command from the Command Translation List window, select the relevant command and then click Remove. Click Yes to the Remove prompt message (see Figure 8):

Figure 8: Remove Command Prompt

10 FC-5 - Configuring the Kramer FC-5 Manager Software