Kramer Electronics RC-81R user manual Flash Memory Upgrade, Downloading from the Internet

Page 16

Flash Memory Upgrade

1.Type the unit’s IP number1 in the Address bar of your browser (or type any link defined by the system integrator).

The RC-8IRfront panel is displayed on your screen (see Figure 12).

2.Press the on-screen buttons to control the unit.

Figure 12: Internal Web Page Front Panel

7Flash Memory Upgrade

The RC device firmware is located in FLASH memory, which lets you upgrade to the latest Kramer firmware version in minutes!

The process involves:

•Downloading the upgrade package from the Internet (see section 7.1)

•Connecting the PC to the RS-232 port (see section 7.2)

•Upgrading the firmware (see section 7.3)

•Installing the Web Applet (see section 7.4)

7.1Downloading from the Internet

You can download the up-to-date file2 from the Internet. To do so:

1.Go to our Web site at http://www.Kramerelectronics.com and download the file: “SetKFRXXX-xx.zip” from the technical support section.

2.Extract the file “SetKFRXXX-xx.zip”package, which includes the KFR-Programmer application setup, the .s19 firmware file and the Web Applet dat file, to a folder (for example, C:\Program Files\KFR Upgrade).

3.Install the KFR-Programmer Application.

1 The default IP number is 192.168.1.39, and may be changed by the system integrator 2 File names are liable to change from time to time

13

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Model Contents FiguresTables Introduction Getting StartedOverview Up to five machines with unique IP addressesRC-8IR Front Panel Features Your Universal Room ControllerDefine the RC-8IRright side panel Installing the RC-8IR Universal Room Controller Installing the RC-8IR Universal Room ControllerSetting the Labels and Button Caps Button Cap OrientationMounting the Device Housing Mounting the RC-8IR FaceplateUsing the RC-8IR Universal Room Controller Example of a Typical RC-8IR ConfigurationExample of a Typical RC-8IR Setup in the Lecture Auditorium Commands Configuration Operating the RC-8IRAn Example of Operating the RC-8IR Shows an operating exampleUsing the Macro Buttons Using the Internal WebLocking the Front Panel Turning the Light of the Backlit Buttons On and OffFlash Memory Upgrade Downloading from the InternetConnecting the PC to the RS-232 Port Upgrading FirmwareTechnical Specifications Installing the Web AppletLimited Warranty 2900-REV
Top Page Image Contents