Kramer Electronics RC-81R user manual Define the RC-8IRright side panel

Page 7

Your Universal Room Controller

Figure 2 and Table 2 define the RC-8IRright side panel:

Front Panel

Buttons

Figure 2: RC-8IR Right Side Panel

Table 2: RC-8IR Right Side Panel Features

	#	Feature		Function
	1	Housing and Faceplate Support	Device housing supports the faceplate
	2	RELAY2	Connect each relay to a room item (such as lighting, screen
	3	RELAY1	settings, blinds, and so on)1
	4	RS-485Terminal Block	Connect to the RS-485 detachable terminal block on a switcher
		Connector	or PC
	5	RS-232Terminal Block	Connect to the RS-232 connector on the A/V equipment or a PC or
		Connector (1 and 2)	other Serial Controller
	6	IR OUT1 PIN
	6	GND PIN	Connect to an IR emitter cable
		IR OUT2 PIN
	7	GND PIN	Connects (-) to the Ground
	8	+12VDC IN PIN	Connects (+) to the connector for powering the unit

	1 See the examples in Figure 4

4				KRAMER: SIMPLE CREATIVE TECHNOLOGY

Image 7

Contents Model Figures ContentsTables Getting Started IntroductionUp to five machines with unique IP addresses OverviewYour Universal Room Controller RC-8IR Front Panel FeaturesDefine the RC-8IRright side panel Installing the RC-8IR Universal Room Controller Installing the RC-8IR Universal Room ControllerButton Cap Orientation Setting the Labels and Button CapsMounting the RC-8IR Faceplate Mounting the Device HousingExample of a Typical RC-8IR Configuration Using the RC-8IR Universal Room ControllerExample of a Typical RC-8IR Setup in the Lecture Auditorium Operating the RC-8IR Commands ConfigurationShows an operating example An Example of Operating the RC-8IRTurning the Light of the Backlit Buttons On and Off Using the Macro ButtonsUsing the Internal Web Locking the Front PanelDownloading from the Internet Flash Memory UpgradeUpgrading Firmware Connecting the PC to the RS-232 PortInstalling the Web Applet Technical SpecificationsLimited Warranty 2900-REV