Kramer Electronics 2900-3000730 Rev 2 Installing the Inner Frame, Installing a MegaTOOL

Page 13

5.1.3Installing a MegaTOOL

To install a MegaTOOL, as shown in Figure 3:

1.Screw the supplied spacers to their designated places (one on each side).

2.Insert the MegaTOOL, from beneath, through the MegaTOOL opening.

3.Screw the screws (one on each side) through the frame holes and spacers.

Figure 3: Installing the MegaTOOL

5.2Installing the Inner Frame

To install the inner frame:

1.Place the inner frame inside the TBUS-6xlenclosure.

2.Set the required height using your fingers to bring the inner frame to the desired position, screw and tighten it in place using the height adjustment screws (supplied with the inner frame).

iInner frame kits come with assembly instructions.

10

TBUS-6xl - Installing the TBUS-6xl

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Modular TBUS-6xl Page Figures Introduction Achieving the Best Performance Getting StartedGlossary Overview An optional insert kit to replace one power socketYour TBUS-6xl Enclosure Feature FunctionTBUS-6xl Optional Inserts TBUS-6xl Optional Inner FramesPower Socket Power Specs Type Power Socket OptionsPower Cord Type Description Power Cord OptionsAssembling the Inner Frame Installing the TBUS-6xlMounting the Power Socket Assemblies Installing a MegaTOOL Installing the Inner Frame123+2mm 225+2mm Cutting an Opening in the TableInserting TBUS-6xl into the Prepared Opening Inserting the TBUS-6xl through the Cut Out OpeningInserting Pass-through Cables Connecting the CablesAdjusting the Height of the Inner frame TBUS-6xl Boardroom Installation Using the TBUS-6xlPower Source Technical Specifications of the Assembled TBUS-6xlTBUS-6xl Page Safety Warning
Top Page Image Contents