Kramer Electronics 2900-3000730 Rev 2 user manual Adjusting the Height of the Inner frame

Page 17

5.7Adjusting the Height of the Inner frame

If needed, you can adjust the inner frame height to accommodate large or bulky cables. To adjust, perform the following:

1.Remove the four height adjustment screws, while supporting the surface from underneath with your fingers.

2.Raise or lower the inner frame to the required height, insert the screws, and tighten them in place.

14	TBUS-6xl - Installing the TBUS-6xl

Image 17

Contents Modular TBUS-6xl Page Figures Introduction Glossary Getting StartedAchieving the Best Performance Overview An optional insert kit to replace one power socketYour TBUS-6xl Enclosure Feature FunctionTBUS-6xl Optional Inserts TBUS-6xl Optional Inner FramesPower Socket Power Specs Type Power Socket OptionsPower Cord Type Description Power Cord OptionsAssembling the Inner Frame Installing the TBUS-6xlMounting the Power Socket Assemblies Installing a MegaTOOL Installing the Inner Frame123+2mm 225+2mm Cutting an Opening in the TableInserting TBUS-6xl into the Prepared Opening Inserting the TBUS-6xl through the Cut Out OpeningInserting Pass-through Cables Connecting the CablesAdjusting the Height of the Inner frame TBUS-6xl Boardroom Installation Using the TBUS-6xlPower Source Technical Specifications of the Assembled TBUS-6xlTBUS-6xl Page Safety Warning