LG Electronics RCRPS06GR owner manual Channel Lock, Code Retrieval, To turn channel lock on

Channel Lock

Channel lock automatically sends channel commands, like the CH, PREV CHAN, and 0–9 number keys, to your satellite receiver, cable box, or digital TV converter when you’re in TV mode. This can save you keypresses if you use a device other than your TV to change channels.

To turn channel lock on:

1.Press and hold the device key for the device you use to change channels. While you’re holding down this device key, use your other hand to press and hold the remote’s CH + key at the same time.

2.Wait until the remote’s POWER key comes on and stays on. Then release both keys.

3.Press OK•ENTER to lock channel commands to this device.

To turn channel lock off:

1.Press and hold the TV key. While you’re holding down the TV key, use your other hand to press and hold the remote’s CH – key at the same time.

2.Wait until the remote’s POWER key comes on and stays on. Then release both keys.

3.Press OK•ENTER to start changing channels with your TV.

NOTE: The Preset Channel feature works independently of Channel Lock feature. When using Preset Channel feature please follow the “Using Your Preset Channels” section of this user guide.

ENGLISH

Code Retrieval

Once you’ve programmed the remote to control your devices, you may want to record the codes for future reference. If you used the Direct Code Entry method, this is easy. Just find the codes you entered and make a note of them in the boxes below. If you used one of the Code Search methods to program your remote or if you used the Direct Entry method but don’t remember the code, you will need to retrieve each device’s five-digit code. Retrieving the actual code and writing it down will save you time if you ever need to program the remote again. If the codes are recorded, you can use the Direct Entry method to reprogram your remote to control your devices, which is quick and easy.

19