3.Wait until the POWER key turns on and stays on. Then release both keys. The remote is now in Learning mode.
4.On the learning remote, press the key you want to use for the learned function. The illuminated POWER key blinks once, then remains on.
5.On the original remote, press and hold the key you want to teach to the universal remote. Wait until the POWER key on the learning remote blinks once, then release the key on the original remote. The learning remote has finished learning this key.
Note: If a problem occurs during the Learning process, the illuminated POWER key blinks four times, but the unit remains in the Learning mode. If this occurs, adjust the distance between the remotes slightly and repeat from step 4.
6.To learn another key for this device mode: Repeat steps 4 and 5 for the key you want to learn.
To learn keys in a different device mode: Repeat steps
To save learned keys and exit learning: press any device key (like TV) on the learning remote.
Learning Tips
•Make sure the batteries in both the learning and original remote(s) are fresh.
•Incandescent or
•Make sure the original remote is in the same mode as the universal remote so that the Learned key is assigned to the correct mode.
•You cannot learn any commands on the device, macro, exit, preset and backlight keys.
•If you use the VOL+/- keys to learn new functions, the volume control will not adjust the volume in the Volume Punch Through mode.
•To exit the Learning mode press any device key.
•The remote exits Learning mode if it has run out of memory to store new learned keys.
•To ensure that your units are compatible and to increase your familiarity with the Learning process, experiment by learning two or three keys initially. Then, carry out a Master Clear before learning all the desired functions from your original remote.
22