LG Electronics LST-4200A owner manual Programming the Remote Control to Operate Other Devices

Press the POWER button and the MUTE button simultaneously. The Remote Control is now ready to program the code for the device.

Programming the Remote Control to Operate Other Devices

STB	TV VCR	DVD AUX
STB	MODE	POWER
TV/INPUT	ez ADD	*
AUDIO	CC	SIGNAL

SELECT

MUTEFLASHBK

PG UP

PG DN

RATIO FREEZE SURF HELP

PROGRAM STATION

GUIDE

The HDTV Receiver Remote Control is a multi-brand or universal Remote Control that can be programmed to operate most remote-controllable devices from other manufacturers.

ote

The Remote Control may not be able to control all models of other brands.

1To find out whether your Remote Control can operate a device without programming, turn on the device such as a VCR and select the corre- sponding mode (VCR) by pressing MODE on the Remote Control while pointing at the device. Use the POWER and CH +/– buttons to see if the

device responds properly. If not, the Remote Control requires program- ming.Test your Remote Control.

2ding mode (VCR, AUX, TV, DVD or STB) by pressing MODE on the Remote Control.Turn on the device to be programmed. Then select the correspon-

3

4First, if you press the CH + buttons repeatedly, the codes will change one at-a-time. If the right code is found, the device will turn off. Second, enter the code number using the number buttons on the Remote Control. The right code numbers for the corresponding device

can be found on the following pages. If the code is correct, the device will turn off.There are two ways to find the correct code for the device.

5Press the EXIT button to store the programming code.

6 Test the Remote Control functions to see if the device responds properly. If not, repeat from step 2.

REFERENCE

43