LG Electronics 26LQ630H, 32LQ630H Sleep Timer, Feature Level, Caption Lock, Hospital Mode

Page 23

Installer Menu (Cont.)

012 - IR BANKS EN (IR Banks Enable)

For direct access to a particular channel bank. When enabled, you can access a channel bank by inputting the discrete IR code for that bank.

Note: This item is not available in the Installer Menu when item 027 HOSPITAL MODE is set to 0.

013 - SCAN MODE (Functional after 2-5-5 + MENU transfer of Channel Map)

When set to 1 (default), allows TV to be turned ON when Channel Up/Down buttons are pressed on pillow speaker. Also, TV will turn OFF when Channel Up/Down key is used to tune above or below Channel Map pivot point. By default, Channel Map pivot point is between the highest and lowest channel in the Channel Map (also see item 014 STRT CH IN SM). Set to 0 to disable.

014 - STRT CH IN SM (Start Channel in Scan Mode)

Only valid when item 013 SCAN MODE is set to 1 (enabled). When set to 1, forces Channel Map pivot point to be between the RF channel designated in item 004 STRT CHANNEL and next lower channel in the Channel Map. Set to 0 to disable (default).

Note: This item is not available in the Installer Menu when item 013 SCAN MODE is set to 0.

015 - SLEEP TIMER

If set to 1, the Sleep Timer feature may be used. If set to 0, the Sleep Timer is not available.

016 - EN TIMER (Enable On/Off Timers)

If set to 1, the Timer function is available to the end user and enabled continuously. Set to 0 to disable On/Off timers.

Note: Clock must be set in order for timers to be used.

017 - ALARM

Gives the installer the option of making the Alarm function available to the end user. If set to 1, the Alarm function is available to the end user. Set to 0 to disable the Alarm function.

Note: Clock must be set before the Alarm function will work.

020 - FEATURE LEVEL

This function determines an additional IR code scheme to which the TV will respond, allowing for the use of unique IR codes based on “bed number” in a multi-TV single room installation. First determine the IR mode; then select the bed number.

Note: Item 027 HOSPITAL MODE must be set to 0 to enable Legacy Zenith Bed 1 or Bed 2 IR codes and Speaker selections.

Values

IR Mode

Bed #

Speaker

0 – 1

Legacy Zenith (Hospital)

1 – 2

TV

16 – 24

Multi-code Remote

1 – 9

TV

64 – 65

Legacy Zenith (Hospital)

1 – 2

Pillow

Note: For further information, see documentation for the accessory package that includes the multi-code remote.

021 - V-CHIP (Parental Control)

Set to 1 to activate V-Chip (Parental Control) and have it available to the end user to filter and control or otherwise restrict program- ming content that can appear. Set to 0 to turn the V-Chip feature Off (not available to user); no programming restrictions can be set.

022 - MAX BLK HRS (Maximum Block Hours)

Sets hours from 0 to 99 for the maximum V-Chip (Parental Control) block hours. Default setting is for 12 blocking hours.

Note: This item is not available in the Installer Menu unless item 084 PERMANENT BLK is set to 0.

023 - CAPTION LOCK

If set to 0, captions are OFF when the TV is turned ON. Set to 1 to use the caption setting configured before the TV was turned OFF when the TV is turned ON.

025 - FUNCTION PRE (Function Preview)

Set to 1 to allow access to the Channel Preview/Banks Setup Menu via the CH PREVIEW key on Installer Remote. Set to 0 to disable access to the Channel Preview/Banks Setup Menu.

027 - HOSPITAL MODE

Set according to the speaker selection, the pillow speaker code/ supply voltage and the hospital IR code.

Value

Speaker

Pillow Speaker

Hospital IR Code

Code/Voltage

 

 

 

000

Determined by

Zenith (+12v)

Disabled

 

item 020 setting

 

 

001

Pillow Only

Zenith (+12v)

Zenith Bed #1

002

Pillow Only

Zenith (+12v)

Zenith Bed #2

017

Pillow Only

Philips (+5v)

Zenith Bed #1

018

Pillow Only

Philips (+5v)

Zenith Bed #2

033

Pillow Only

RCA (-5v)

Zenith Bed #1

034

Pillow Only

RCA (-5v)

Zenith Bed #2

065

TV Only

Zenith (+12v)

Zenith Bed #1

066

TV Only

Zenith (+12v)

Zenith Bed #2

081

TV Only

Philips (+5v)

Zenith Bed #1

082

TV Only

Philips (+5v)

Zenith Bed #2

097

TV Only

RCA (-5v)

Zenith Bed #1

098

TV Only

RCA (-5v)

Zenith Bed #2

129

Pillow & TV

Zenith (+12v)

Zenith Bed #1

130

Pillow & TV

Zenith (+12v)

Zenith Bed #2

145

Pillow & TV

Philips (+5v)

Zenith Bed #1

146

Pillow & TV

Philips (+5v)

Zenith Bed #2

161

Pillow & TV

RCA (-5v)

Zenith Bed #1

162

Pillow & TV

RCA (-5v)

Zenith Bed #2

254

TV Only

0v

Zenith Bed #2

When Hospital Mode is enabled, channel banks are also avail- able. Refer to channel banks information in this document for further details. Channel banks are not supported if Hospital Mode is set to 0 or on TVs that are configured for FTG Mode operation.

206-4207

23

Page 22 Page 24
Image 23
Page 22 Page 24
Contents Copyright 2012, LG Electronics U.S.A., Inc 206-4207 Rev CFor Customer Support/Service, please call­ Disconnect Device Power CordOverloading GroundingTransporting Product CleaningOutdoor Antenna Grounding Antenna Grounding According to NEC, ANSI/NFPATable of Contents Pass-through Mode Commercial Mode OverviewSetup Checklist External MPI Control Installer MenuInstalling Batteries in Installer Remote FTG ModeRemote Management in FTG Mode ProCentric Operation ProCentric TV Interactive Menu FeaturesProCentric Setup Installer Remote Control Typical Key Functions Select the tuning band Express Script Installer Menu WizardSelect the pillow speaker code Select the speaker configurationSelect the Aux inputs Edit the Channel Map Run the Auto Search Auto TuningIcon CompletionCloning Methods Custom Master TV SetupClonable TV Setup Menu Features Before You BeginSet up TV features Custom Master TV Setup ProcedureSet Installer Menu items Channel Optional Run Auto TuningRecommended Lock the channel lineup Verify the TV setupSet up channel banks Exiting the Installer Menu and Activating Updates Installer MenuAccessing the Installer Menu Using the Installer MenuStrt Channel Installer Menu Items 000 throughCH not Avble Installer Menu Items 071 throughMute Disable Detailed Descriptions of Installer Menu ItemsInstaller Sequence Caption Lock Sleep TimerFeature Level Hospital ModeQuick Shutoff Poll RateTiming Pulse AUX StatusAtsc Band Atsc Tune ModeProcentric Back LightingData Channel Power SavingsTo perform channel editing/labeling Channel Icons / Custom Text Labels 2-5-4 + Menu ModeChannel Banks Overview Channel Banks SetupAccessing the Channel Preview/Banks Setup Menu Adding / Deleting / Blanking Channels Inactive TV SetupChannel Status Options for Channel Banks Channel Status OptionsChannel Banks Worksheets Example Channel Banks After Auto TuningChannel Banks Worksheet Before you begin cloning Cloning OverviewUSB Cloning Notes USB Cloning ProceduresLearn Setup from Master TV Teach Master TV Setup to Target TV Learn From TV TLL Teach To TV TLL TLL-1100A Cloning Notes Clone Programmer Cloning ProceduresOptional Set the Clock LT2002 Clone Programmer LT2002 Cloning NotesTo Execute ITEM, Press ON/OFF, POWER, or Enter FTG Mode via EBL FTG Mode of Operation OverviewFTG Mode via CPU or EBL FTG Mode via CPUFunction Menu Determining the TV Operating ModeTV Setup Menus FTG Mode via CPU From previous Teaching FTG Configuration to a TV Learning an FTG Configuration File from a TV Run Auto Tuning Channel Search Optional Manual Configuration / TV Setup26/32LQ630H FTG Mode via EBL Local Configuration22LQ630H Jack PanelCLEAR/SAVE FTG Configuration ListFTG File Manager Utilities Overview FTG File Manager Main ScreenPrint MAP FTG Channel Map Configuration UtilityADD Exit Update DeleteFTG Channel Map Editor Configuration Settings FTG Installer Menu Configuration UtilityUpgrading TV/PTC Software Checking the Software VersionsDownloading a Splash Screen Image Splash Screen Image File GuidelinesStatic Reference Power Consumption SettingsEnable Reference TV Aux Input ConfigurationPower Reference b-LAN Setup & OverviewTV Standby State TV Power On State 001 Default OffReference LQ630H/CQ610H Hospital Operations Hospital FeaturesFTG/PPV Mode Hospital Mode State Disabled EnabledSpeaker Selection Additional FTG Mode via EBL Options Reference Resetting Factory Defaults on the TVsInstaller Menu Item 117 Fact Default Additional FTG Mode via CPU OptionsReference TV Zone Restrictions USB Reference 22LQ630H Rear and Side Jack PanelsGame Control MPI Reference 26/32LQ630H Rear and Side Jack PanelsAUDIO/VIDEO Reference 42CQ610H Rear and Side Jack PanelsPillow Speaker Interface Reference Pillow Speaker SetupControlling the TV with Mechanical Switches Connect a Pillow Speaker to the LCD TVTypical ProCentric Pillow Speaker USB MediaPedestal Mounts and Stands Reference Vesa Standard TV MountsWall Mounts Troubleshooting Controller Quick Check Troubleshooting Flow ChartSymptom Possible Causes Solutions Commercial Mode Check / FTG Operation TroubleshootingFTG Operation Troubleshooting Clone Programmer Symptom Possible Causes Possible Solutions Clone Programmer TroubleshootingReset Clone Programmer After Static Shock Channel Preview/Banks Setup Menu Channel Banks Setup TroubleshootingSymptom Possible Cause Possible Solution Reference Glossary of Terms Date Description Document Revision History / NotesDocument Revision History 206-4207
Related manuals
Manual 200 pages 28.02 Kb Manual 125 pages 12.03 Kb

32LQ630H, 42CQ610H, 26LQ630H, 22LQ630H specifications

LG Electronics has long been a leader in the field of innovative display technology, and their latest lineup of smart TVs, including the 26LQ630H, 42CQ610H, 22LQ630H, and 32LQ630H, demonstrates this commitment to excellence. Each model in this series comes equipped with cutting-edge features and technologies aimed at enhancing the viewing experience, making them perfect additions to any household.

The LG 26LQ630H, with its compact 26-inch display, is ideal for smaller spaces such as kitchens or bedrooms. This model boasts Full HD resolution, ensuring crisp and clear images with vibrant colors. It utilizes LG's advanced display technologies, including various picture modes that allow users to customize their viewing experience based on the content being watched. Its built-in Wi-Fi capabilities enable seamless streaming from popular services, providing access to an extensive library of movies and shows.

Moving up in size, the 22LQ630H offers a slightly larger 22-inch screen, making it a great choice for those seeking a versatile TV that fits into various room layouts. Like the 26LQ630H, it features Full HD resolution and an array of picture enhancements, ensuring that viewers enjoy a sharp image quality. The inclusion of audio features, such as Dolby Audio support, elevates the sound experience, providing a fuller and more immersive audio landscape.

For a more expansive viewing experience, the 32LQ630H comes in at 32 inches, catering to those who desire a larger display without overwhelming their space. This model further enhances connectivity options, providing multiple HDMI and USB ports for easy connection to external devices like gaming consoles and soundbars. Its user-friendly interface is powered by webOS, offering a seamless navigation experience through streaming apps and channels with voice command capabilities.

The flagship 42CQ610H stands out with its larger 42-inch screen, delivering a striking visual performance that is perfect for entertaining guests or enjoying a cinematic experience at home. This model features LG's advanced AI Picture Pro technology, which automatically optimizes picture quality based on the environment and content type. The 42CQ610H also supports Smart Home compatibility, allowing users to link and control devices through their TV seamlessly.

In summary, LG's 26LQ630H, 22LQ630H, 32LQ630H, and 42CQ610H models showcase a range of sizes and features that cater to different viewer needs. Each model's incorporation of advanced display technology, versatile connectivity options, and smart features make them standout choices in the competitive landscape of modern television. With LG's commitment to quality and innovation, these smart TVs are poised to enhance any entertainment setup.
Top Page Image Contents