LG Electronics 26LQ630H Optional Manual Configuration / TV Setup, Run Auto Tuning Channel Search

Page 47

FTG Mode via CPU (Cont.)

Optional Manual Configuration / TV Setup

The manual configuration procedures below should only be performed if you do not know the RF channels at the site and need to “Learn” an FTG Configuration file from an LQ630H or CQ610H TV as described on the previous page. Ensure the TV is in Pass-through Mode before you begin.

Set Installer Menu Items

These steps provide specific instruction only on the Installer Menu items that should be set on an LQ630H or CQ610H TV. Refer to pages 19 to 26 for detailed information on all Installer Menu items.

1.Make sure the TV is ON. Then, use the Installer Remote to enter the Installer Menu: Press MENU repeatedly until the on-screen display of the TV setup menus no longer toggles, and then press 9-8-7-6+ OK (Enter).

2.Set Installer Menu item 117 FACT DEFAULT to 001 and press OK (Enter) on the Installer Remote.

This clears all Installer Menu custom settings, the channel lineup, etc. and reloads the factory default settings. The value will change back to 0 after the commercial controller (PTC) has been restored to factory default condition. This step ensures that the TV Channel Memory will be the active channel lineup.

3.Set Installer Menu item 003 BAND/AFC, as appropriate.

Broadcast: Set to

000.

HRC: Set to 002.

CATV: Set to 001

(default).

IRC: Set to 003.

4.Set Installer Menu item 027 HOSPITAL MODE, as appropriate, to select the speaker configuration.

5.Set any other Installer Menu items that affect your TV programming network to the required configuration. For example, enable/disable Aux inputs, set a Start Channel, etc.

6.After you have adjusted all Installer Menu item settings as required, press OK (Enter) once on the Installer Remote to save your changes; then, press OK (Enter) again to exit the menu.

Run Auto Tuning (Channel Search)

Note: In the FTG Configuration file, Logical Channel numbers will automati- cally be assigned in ascending order, starting with 0 (zero), to the Physical Channels from the TV Channel Map.

Note: Pro:Idiom decryption for encrypted channels will not be enabled unless you use the FTG File Manager to set the channel attributes.

xxLQ630H PTC INSTALLER MENU

CPU-CTV

000

INSTALLER SEQ

000

 

 

 

UPN

000-000-000-000

ASIC D279

PTC

V1.00.013

CPU V3.07.00

 

 

 

Typical Installer Menu

Note: The Installer Menu header will vary depending on the TV you are setting up.

117

FACT DEFAULT

000

003

BAND/AFC

001

027

HOSPITAL MODE

254

Adjust the values for these

Installer Menu items.

CHANNEL

Move

Enter

• Auto Tuning

 

 

Manual Tuning

 

 

Channel Edit

 

 

Channel Label

 

 

1.Search for all available analog and digital channels: Use the Installer Remote to go to the Channel Menu, select the Auto Tuning option, and follow the on-screen instructions.

2.Use the Channel Edit option in the Channel Menu to edit the channel lineup, as necessary, to include free to guest channels only. Add/delete channels per your system requirements.

Once you have completed these procedures, return to “Learning an FTG Configuration File from a TV” on the previous page to complete the Learn sequence.

Use Channel Menu options to run Auto Tuning and edit the channel lineup, as necessary.

206-4207

47

Image 47
Contents Copyright 2012, LG Electronics U.S.A., Inc 206-4207 Rev CFor Customer Support/Service, please call­ Disconnect Device Power CordOverloading GroundingTransporting Product CleaningOutdoor Antenna Grounding Antenna Grounding According to NEC, ANSI/NFPATable of Contents Pass-through Mode Commercial Mode OverviewSetup Checklist External MPI Control Installer MenuInstalling Batteries in Installer Remote FTG ModeRemote Management in FTG Mode ProCentric Operation ProCentric TV Interactive Menu FeaturesProCentric Setup Installer Remote Control Typical Key Functions Select the tuning band Express Script Installer Menu WizardSelect the pillow speaker code Select the speaker configurationSelect the Aux inputs Edit the Channel Map Run the Auto Search Auto TuningIcon CompletionCloning Methods Custom Master TV SetupClonable TV Setup Menu Features Before You BeginSet up TV features Custom Master TV Setup ProcedureSet Installer Menu items Channel Optional Run Auto TuningRecommended Lock the channel lineup Verify the TV setupSet up channel banks Exiting the Installer Menu and Activating Updates Installer MenuAccessing the Installer Menu Using the Installer MenuStrt Channel Installer Menu Items 000 throughCH not Avble Installer Menu Items 071 throughMute Disable Detailed Descriptions of Installer Menu ItemsInstaller Sequence Caption Lock Sleep TimerFeature Level Hospital ModeQuick Shutoff Poll RateTiming Pulse AUX StatusAtsc Band Atsc Tune ModeProcentric Back LightingData Channel Power SavingsTo perform channel editing/labeling Channel Icons / Custom Text Labels 2-5-4 + Menu ModeChannel Banks Overview Channel Banks SetupAccessing the Channel Preview/Banks Setup Menu Adding / Deleting / Blanking Channels Inactive TV SetupChannel Status Options for Channel Banks Channel Status OptionsChannel Banks Worksheets Example Channel Banks After Auto TuningChannel Banks Worksheet Before you begin cloning Cloning OverviewUSB Cloning Notes USB Cloning ProceduresLearn Setup from Master TV Teach Master TV Setup to Target TV Learn From TV TLL Teach To TV TLL TLL-1100A Cloning Notes Clone Programmer Cloning ProceduresOptional Set the Clock LT2002 Clone Programmer LT2002 Cloning NotesTo Execute ITEM, Press ON/OFF, POWER, or Enter FTG Mode via EBL FTG Mode of Operation OverviewFTG Mode via CPU or EBL FTG Mode via CPUFunction Menu Determining the TV Operating ModeTV Setup Menus FTG Mode via CPU From previous Teaching FTG Configuration to a TV Learning an FTG Configuration File from a TV Run Auto Tuning Channel Search Optional Manual Configuration / TV Setup26/32LQ630H FTG Mode via EBL Local Configuration22LQ630H Jack PanelCLEAR/SAVE FTG Configuration ListFTG File Manager Utilities Overview FTG File Manager Main ScreenPrint MAP FTG Channel Map Configuration UtilityADD Exit Update DeleteFTG Channel Map Editor Configuration Settings FTG Installer Menu Configuration UtilityUpgrading TV/PTC Software Checking the Software VersionsDownloading a Splash Screen Image Splash Screen Image File GuidelinesStatic Reference Power Consumption SettingsEnable Reference TV Aux Input ConfigurationPower Reference b-LAN Setup & OverviewTV Standby State TV Power On State 001 Default OffReference LQ630H/CQ610H Hospital Operations Hospital FeaturesFTG/PPV Mode Hospital Mode State Disabled EnabledSpeaker Selection Additional FTG Mode via EBL Options Reference Resetting Factory Defaults on the TVsInstaller Menu Item 117 Fact Default Additional FTG Mode via CPU OptionsReference TV Zone Restrictions USB Reference 22LQ630H Rear and Side Jack PanelsGame Control MPI Reference 26/32LQ630H Rear and Side Jack PanelsAUDIO/VIDEO Reference 42CQ610H Rear and Side Jack PanelsPillow Speaker Interface Reference Pillow Speaker SetupControlling the TV with Mechanical Switches Connect a Pillow Speaker to the LCD TVTypical ProCentric Pillow Speaker USB MediaPedestal Mounts and Stands Reference Vesa Standard TV MountsWall Mounts Troubleshooting Controller Quick Check Troubleshooting Flow ChartSymptom Possible Causes Solutions Commercial Mode Check / FTG Operation TroubleshootingFTG Operation Troubleshooting Clone Programmer Symptom Possible Causes Possible Solutions Clone Programmer TroubleshootingReset Clone Programmer After Static Shock Channel Preview/Banks Setup Menu Channel Banks Setup TroubleshootingSymptom Possible Cause Possible Solution Reference Glossary of Terms Date Description Document Revision History / NotesDocument Revision History 206-4207
Related manuals
Manual 200 pages 28.02 Kb Manual 125 pages 12.03 Kb

32LQ630H, 42CQ610H, 26LQ630H, 22LQ630H specifications

LG Electronics has long been a leader in the field of innovative display technology, and their latest lineup of smart TVs, including the 26LQ630H, 42CQ610H, 22LQ630H, and 32LQ630H, demonstrates this commitment to excellence. Each model in this series comes equipped with cutting-edge features and technologies aimed at enhancing the viewing experience, making them perfect additions to any household.

The LG 26LQ630H, with its compact 26-inch display, is ideal for smaller spaces such as kitchens or bedrooms. This model boasts Full HD resolution, ensuring crisp and clear images with vibrant colors. It utilizes LG's advanced display technologies, including various picture modes that allow users to customize their viewing experience based on the content being watched. Its built-in Wi-Fi capabilities enable seamless streaming from popular services, providing access to an extensive library of movies and shows.

Moving up in size, the 22LQ630H offers a slightly larger 22-inch screen, making it a great choice for those seeking a versatile TV that fits into various room layouts. Like the 26LQ630H, it features Full HD resolution and an array of picture enhancements, ensuring that viewers enjoy a sharp image quality. The inclusion of audio features, such as Dolby Audio support, elevates the sound experience, providing a fuller and more immersive audio landscape.

For a more expansive viewing experience, the 32LQ630H comes in at 32 inches, catering to those who desire a larger display without overwhelming their space. This model further enhances connectivity options, providing multiple HDMI and USB ports for easy connection to external devices like gaming consoles and soundbars. Its user-friendly interface is powered by webOS, offering a seamless navigation experience through streaming apps and channels with voice command capabilities.

The flagship 42CQ610H stands out with its larger 42-inch screen, delivering a striking visual performance that is perfect for entertaining guests or enjoying a cinematic experience at home. This model features LG's advanced AI Picture Pro technology, which automatically optimizes picture quality based on the environment and content type. The 42CQ610H also supports Smart Home compatibility, allowing users to link and control devices through their TV seamlessly.

In summary, LG's 26LQ630H, 22LQ630H, 32LQ630H, and 42CQ610H models showcase a range of sizes and features that cater to different viewer needs. Each model's incorporation of advanced display technology, versatile connectivity options, and smart features make them standout choices in the competitive landscape of modern television. With LG's commitment to quality and innovation, these smart TVs are poised to enhance any entertainment setup.