LG Electronics XBV613 warranty Connection to an Amplifier, Digital Multi-channel sound

Page 12

Connection to an Amplifier

You can only listen to DVD playback using COAXIAL

(X)and AUDIO OUT (A2) connections. The tuner and VCR will still be heard through the RF.OUT (R) or DVD/VCR AUDIO OUT (A1) jack. (See page 10.)

Connecting to an amplifier equipped with two channel analog stereo or Dolby Pro Logic II/Pro Logic

Connect the Left and Right AUDIO OUT (or DVD/VCR AUDIO OUT) jacks on the DVD+VCR to the audio left and right in jacks on your amplifier, receiver, or stereo system using the audio cables (A1, A2) supplied.

Connecting to an amplifier equipped with two channel digital stereo (PCM) or to an Audio/Video receiver equipped with a multi-channel decoder (Dolby Digital™, MPEG 2, or DTS)

1.Connect one of the DVD+VCR’s DIGITAL AUDIO OUT jacks (COAXIAL X) to the corresponding in jack on your amplifier. Use an optional digital (COAXIAL X) audio cable.

2.You will need to activate the DVD+VCR’s digital output. (See “AUDIO” on page 17).

Digital Multi-channel sound

A digital multi-channel connection provides the best sound quality. For this you need a multi-channel Audio/Video receiver that supports one or more of the audio formats supported by your DVD+VCR (MPEG 2, Dolby Digital and DTS). Check the receiver manual and the logos on the front of the receiver.

Caution:

Due to the DTS Licensing agreement, the digital output will be in DTS digital out when DTS audio stream is selected.

Notes:

•If the audio format of the digital output does not match the capabilities of your receiver, the receiver will pro- duce a strong, distorted sound or no sound at all.

•Six Channel Digital Surround Sound via digital connec- tion can only be obtained if your receiver is equipped with a Digital Multi-channel decoder.

•To see the audio format of the current DVD in the on- screen display, press AUDIO.

Rear of DVD+VCR

A1

A2

X

L

R

COAXIAL

 

 

AUDIO INPUT

DIGITAL INPUT

Amplifier (Receiver)

Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic”, and the double-D symbol are trademarks of Dolby Laboratories.

DTS and DTS Digital Out are trademarks of Digital Theater Systems, Inc.

Accessory Audio/Video (A/V) Connections to

DVD+VCR

Connect the VCR IN LINE 1 or LINE 2 jacks on the DVD+VCR to the audio/video out jacks on your accessory component, using the optional audio/video cables. (Refer to page 23 for “Recording from External Components”.)

12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Installation and Operating Guide Warranty V1310MZ.NA1ULZENGRegulatory Information FCC Part Important Safety Instructions Contents Symbol Used in this Manual About the Remote ControlAbout the Symbol Display Moisture CondensationTypes of Playable Discs Regional codeSelecting the Viewing Source Front Panel DVDVCR LINE2 VIDEO/AUDIO L/RRemote Control Backward / Forward m / MRear Panel DVD OUTConnecting an Antenna or Cable TV Basic TV ConnectionsAntenna Cable TVOptional TV Connections Accessory Audio/Video A/V Connections to Connection to an AmplifierDigital Multi-channel sound Initial Settings VCR General OperationAuto Clock Set Manual Clock SetAuto Channel Programming To Add or Erase ChannelsBroadcast Type STEREO/SAP/MONO Audio Output STEREO/LEFT/RIGHTInitial Settings DVD Displaying Disc Information on-screen DVDTo display and exit the Menu To go to the next levelDisplay Mode Menu LanguageDisc Audio / Subtitle / Menu TV AspectDolby Digital / DTS / Mpeg Sample Freq. FrequencyDRC Dynamic Range Control VocalPassword Security Code Lock Parental ControlRating Area CodeVCR Tape Playback VHS Hi-Fi Stereo MTS Broadcast Slow MotionCM Skip Commercial Skip Hi-Fi Stereo Audio SoundTimer Recording VCR Tape RecordingBasic Instructions To pause the recordingChecking or Erasing the Timer Program Program PriorityInstant Timer Recording Recording from External ComponentsChecking the Recording Time Extending the Recording TimeOn-Screen Display VCR Copying from DVD to VCRAdditional VCR Information VCR Auto Play SystemVHS Quasi Playback Sqpb Easy InformationPlayback Setup General featuresButtons Operations DiscsAdditional features Buttons Operations Discs3D Surround Time Search DVD DivXMarker Search DVD DivX To enter a Marker To Recall or Clear a Marked SceneLast Scene Memory DVD ACD Screen SaverPlaying an Audio CD or MP3/WMA file Programmed PlaybackID3 TAG Viewing a Jpeg Disc Playing a DivX Movie file Playable DivX filePlayable Subtitle format Playable Codec formatMaintenance and Service Playing a DVD VR format DiscReference Troubleshooting Symptom Cause CorrectionDVD+VCR Specifications VCR SpecificationsDVD Specifications GeneralPage Warranty Period HOW Service is Handled For Warranty ServiceCustomer INTER-ACTIVE Center Numbers
Top Page Image Contents