LG Electronics XBV613 warranty Instant Timer Recording, Recording from External Components

Page 23

Instant Timer Recording

With this feature you can record for a preset length without using the program timer.

1.Turn on DVD+VCR and the TV.

2.Be sure the TV is tuned to the DVD+VCR output channel (CH 3 or 4). If a direct VIDEO/AUDIO connection is made between the DVD+VCR and the TV, set the TV’s source selector to VIDEO.

3.Insert a video cassette with the safety tab intact.

4.Select the desired channel using CH/TRK (v/V) or the number buttons (0-9). The channel number appears on the TV screen. If you are recording from another source via audio/video input jacks (at the rear or front panel), select LINE1 (rear jacks) or LINE2 (front jacks) by using INPUT.

5.Set the desired recording speed (SP or SLP) using SPEED. The tape speed appears on the TV screen.

6.Press REC/ITR (z) twice. The menu appears on the TV screen, recording starts, and the (TIMER) indicator lights.

INSTANT TIMER RECORD

CHANNEL 2

SPEED SP

START NOW

LENGTH 0H30M

7.Press REC/ITR (z) repeatedly to select the recording time length. Each time you press this button the recording time increases 30 minutes (up to 9 hours). At the end of the recording, the DVD+VCR will stop recording and shut off.

If you set the time to 0H00M, the DVD+VCR goes into the normal recording mode. Press STOP (x) to stop the recording.

Note:

During Instant Timer Recording, you cannot change the channel on the DVD+VCR.

Checking the Recording Time

Press REC/ITR (z) once to check the recording time. The recalled setting automatically returns to the TV screen after 6 seconds.

Extending the Recording Time

The recording time can be extended anytime by pressing REC/ITR (z). Subsequent presses result in advancing the recording time by 30-minute increments.

Note:

If you press PAUSE/STEP (X) during instant timer record- ing, the instant timer recording is cancelled.

Recording from External

Components

You can record from an external component, such as a camcorder or VCR, connected to any of the DVD+VCR’s external inputs.

1.Make sure that the component you want to record from is connected properly to the DVD+VCR. See page 12.

2.Press INPUT repeatedly to select the external input to record from.

•LINE1 (L1): Audio/Video Input mounted on back panel.

•LINE2 (L2): Audio/Video Input mounted on front panel.

3.Load a recordable tape.

4.Set a recording mode (SP or SLP) as necessary by pressing SPEED repeatedly.

5.Play the tape or disc in the external component. If you have a TV attached to your DVD+VCR, you can see the video palying.

6.Press REC/ITR (z) once to start recording. The REC indicator lights in the display window.

7.Press STOP (x) to stop recording.

Notes:

•Before recording, confirm the recording start posi- tion.

•If your source is copy-protected using CopyGuard, you will not be able to record it using this unit. See Copyright on page 6 for more details.

•To record for a fixed length of time, see Instant Timer Recording.

Operation

23

Page 22 Page 24
Image 23
Page 22 Page 24
Contents V1310MZ.NA1ULZENG Installation and Operating Guide WarrantyRegulatory Information FCC Part Important Safety Instructions Contents Moisture Condensation Symbol Used in this ManualAbout the Remote Control About the Symbol DisplaySelecting the Viewing Source Types of Playable DiscsRegional code LINE2 VIDEO/AUDIO L/R Front PanelDVD VCRBackward / Forward m / M Remote ControlDVD OUT Rear PanelCable TV Connecting an Antenna or Cable TVBasic TV Connections AntennaOptional TV Connections Digital Multi-channel sound Accessory Audio/Video A/V Connections toConnection to an Amplifier Manual Clock Set Initial Settings VCRGeneral Operation Auto Clock SetAudio Output STEREO/LEFT/RIGHT Auto Channel ProgrammingTo Add or Erase Channels Broadcast Type STEREO/SAP/MONOTo go to the next level Initial Settings DVDDisplaying Disc Information on-screen DVD To display and exit the MenuTV Aspect Display ModeMenu Language Disc Audio / Subtitle / MenuVocal Dolby Digital / DTS / MpegSample Freq. Frequency DRC Dynamic Range ControlArea Code Password Security CodeLock Parental Control RatingVCR Tape Playback Hi-Fi Stereo Audio Sound VHS Hi-Fi Stereo MTS BroadcastSlow Motion CM Skip Commercial SkipTo pause the recording Timer RecordingVCR Tape Recording Basic InstructionsProgram Priority Checking or Erasing the Timer ProgramExtending the Recording Time Instant Timer RecordingRecording from External Components Checking the Recording TimeCopying from DVD to VCR On-Screen Display VCREasy Information Additional VCR InformationVCR Auto Play System VHS Quasi Playback SqpbDiscs Playback SetupGeneral features Buttons OperationsTime Search DVD DivX Additional featuresButtons Operations Discs 3D SurroundScreen Saver Marker Search DVD DivX To enter a MarkerTo Recall or Clear a Marked Scene Last Scene Memory DVD ACDID3 TAG Playing an Audio CD or MP3/WMA fileProgrammed Playback Viewing a Jpeg Disc Playable Codec format Playing a DivX Movie filePlayable DivX file Playable Subtitle formatPlaying a DVD VR format Disc Maintenance and ServiceReference Symptom Cause Correction TroubleshootingDVD+VCR General SpecificationsVCR Specifications DVD SpecificationsPage Customer INTER-ACTIVE Center Numbers Warranty Period HOW Service is HandledFor Warranty Service
Top Page Image Contents