LG Electronics XBV613 warranty On-Screen Display VCR, Copying from DVD to VCR

Page 24

Copying from DVD to VCR

You can copy the contents of a DVD to a VHS tape.

1.Insert the disc you wish to copy into the DVD deck and close the disc tray.

2.Insert a blank VHS video tape into the VCR deck.

3.Find the place on the DVD from which you want to start dubbing using the PLAY, FF, REW and PAUSE functions.

For best results, pause playback at the point from which you want to record.

4.Press the z REC/ITR. The DVD goes into PLAY mode and the VCR goes into RECORD mode. If the DVD disc menu appears, you may need to press PLAY (N) manually to begin copying.

5.When the DVD is finished playing, press STOP (x) to end copying.

Notes:

If the DVD you are attempting to copy is copy protected, you will not be able to copy the disc. It is not permitted to copy Macrovision encoded DVDs (or Discs). “Lock” is displayed in the display window.

You must stop the copy process manually when the DVD movie ends, or the unit may replay and record over and over again.

When you stop the DVD playback during copying, the recording on VCR is stopped automatically.

On-Screen Display - VCR

Some of these functions will be displayed every time the DVD+VCR is operated.

❶ ❷

❹ ❺

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PLAY

HI-FI

CH 4

 

 

 

SP

 

 

STEREO

 

 

 

 

 

 

 

OCT 8 , SAT 2:15 PM

 

 

TAPE SPEED DISPLAY

STEREO/SAP DISPLAY

FUNCTION DISPLAY

(MONO is not displayed)

DATE DISPLAY

HI-FI DISPLAY

CLOCK/ COUNT/

CHANNEL DISPLAY

REMAIN DISPLAY

 

 

 

Each press of the ENTER/OK changes the TV screen in the following sequence.

STOP

CH 4

SP

STEREO

APR 30 , SAT

2:15 PM

 

 

2:15 PM

0:35:40

REM 1:58

Real-Time Counter

If a tape with contents recorded on it is inserted into the VCR, the real-time counter shows length of the tape running in hours, minutes, and seconds. Press CLK/CNT to select the real-time counter display.

Every press of CLK/CNT changes the TV screen as illustrated below.

2:15 AM

0:05:25

REM 1:07

CLOCK

COUNTER

REMAINING TIME

Counter Memory

This feature is useful if there is a section of tape you want to view immediately after recording or if you want to return to the same point several times.

1.Begin recording or playing a tape.

2.Press CLK/CNT until the real-time counter is dis- played on the TV screen.

3.At the point that you want to locate later, reset the real-time counter to “0:00:00” by pressing CLEAR.

4.Continue to play or record.

5.Press STOP (x) when recording or playback fin- ishes.

6.Press BACKWARD (m). The tape automatically stops when the tape counter returns to about “0:00:00”.

Tape Remaining

This function displays the amount of time remaining on the tape during recording or playback. Press CLK/CNT repeatedly until the REM indicator displays on the TV screen during recording or playback.

The remaining tape length may not be displayed cor- rectly depending on the condition of the tape and the kind of the tape (T-140, T-160, or T-210 etc.).

Notes:

The function displays can be seen displayed on the TV screen for 5 seconds.

The clock (or tape counter, tape remaining) mode will be displayed until you press ENTER/OK.

The tape counter and the remaining tape length indica- tor appear only when a cassette is inserted. Also, the remaining tape length indicator appears after any tape operation.

24

Image 24
Contents Installation and Operating Guide Warranty V1310MZ.NA1ULZENGRegulatory Information FCC Part Important Safety Instructions Contents Symbol Used in this Manual About the Remote ControlAbout the Symbol Display Moisture CondensationTypes of Playable Discs Regional codeSelecting the Viewing Source Front Panel DVDVCR LINE2 VIDEO/AUDIO L/RRemote Control Backward / Forward m / MRear Panel DVD OUTConnecting an Antenna or Cable TV Basic TV ConnectionsAntenna Cable TVOptional TV Connections Accessory Audio/Video A/V Connections to Connection to an AmplifierDigital Multi-channel sound Initial Settings VCR General OperationAuto Clock Set Manual Clock SetAuto Channel Programming To Add or Erase ChannelsBroadcast Type STEREO/SAP/MONO Audio Output STEREO/LEFT/RIGHTInitial Settings DVD Displaying Disc Information on-screen DVDTo display and exit the Menu To go to the next levelDisplay Mode Menu LanguageDisc Audio / Subtitle / Menu TV AspectDolby Digital / DTS / Mpeg Sample Freq. FrequencyDRC Dynamic Range Control VocalPassword Security Code Lock Parental ControlRating Area CodeVCR Tape Playback VHS Hi-Fi Stereo MTS Broadcast Slow MotionCM Skip Commercial Skip Hi-Fi Stereo Audio SoundTimer Recording VCR Tape RecordingBasic Instructions To pause the recordingChecking or Erasing the Timer Program Program PriorityInstant Timer Recording Recording from External ComponentsChecking the Recording Time Extending the Recording TimeOn-Screen Display VCR Copying from DVD to VCRAdditional VCR Information VCR Auto Play SystemVHS Quasi Playback Sqpb Easy InformationPlayback Setup General featuresButtons Operations DiscsAdditional features Buttons Operations Discs3D Surround Time Search DVD DivXMarker Search DVD DivX To enter a Marker To Recall or Clear a Marked SceneLast Scene Memory DVD ACD Screen SaverPlaying an Audio CD or MP3/WMA file Programmed PlaybackID3 TAG Viewing a Jpeg Disc Playing a DivX Movie file Playable DivX filePlayable Subtitle format Playable Codec formatMaintenance and Service Playing a DVD VR format DiscReference Troubleshooting Symptom Cause CorrectionDVD+VCR Specifications VCR SpecificationsDVD Specifications GeneralPage Warranty Period HOW Service is Handled For Warranty ServiceCustomer INTER-ACTIVE Center Numbers