LG Electronics XBV613 warranty VCR Tape Playback

Page 19

Operations - VCR

This chapter describes how to operate the VCR and DVD.

VCR Tape Playback

Press the VCR button to select the device to be oper- ated.

Basic Instructions

1.Turn on the TV.

2.Tune the TV to the DVD+VCR output channel (CH 3 or 4) or if a direct VIDEO/AUDIO connection is made between the DVD+VCR and the TV, set the TV’s source selector to VIDEO.

3.Insert a pre-recorded video cassette.

The indicator lights and the DVD+VCR powers on automatically.

4.If the (TIMER) indicator in the display window is lit, press POWER (1) once.

5.If a tape without a safety tab is inserted the unit starts playback automatically.

If not, press PLAY (N).

6.Press STOP (x) to stop playback. If the tape reaches the end before you press STOP (x) the DVD+VCR automatically stops, rewinds and ejects the tape.

Note:

It is not necessary to select the tape speed for play- back because it is automatically selected by the DVD+VCR. Also, during playback the TV/VCR selec- tor switches to VCR mode automatically.

Auto Tracking

Automatic tracking adjusts the picture to remove snow or streaks and beings when:

A tape is played for the first time.

The tape speed (SP, LP, SLP) changes.

Streaks or snow appear due to scratches on the tape.

Manual Tracking

To manually adjust the tracking use the CH/TRK (v/V) buttons on the remote control or CH (v/V) on the front panel during playback.

Notes:

Vertical jitter requires a very fine adjustment.

Tracking is automatically reset to normal when the tape is ejected or the power cord is unplugged for more than 3 seconds.

Search

This function lets you visually search for a tape sec- tion in either direction: forward and reverse. During the high-speed picture search modes, the audio is muted and horizontal lines (noise bars) appear. Also, a short time is needed to stabilize the tape speed when re-entering the PLAY mode so slight interfer- ence may be observed during this time.

To search:

1.Press BACKWARD (m) or FORWARD (M) during playback.

2.To return to playback, press PLAY (N).

Note:

After 3 minutes in SEARCH mode the DVD+VCR returns to PLAY mode to protect the tape and video heads.

Still Picture and Frame-by-Frame Playback

1.Press PAUSE/STEP (X) during playback.

A still picture appears on the TV screen and the audio is muted.

2If the still picture vibrates vertically, stabilize it by using CH/TRK (v/V) on the remote control.

3.Press PAUSE/STEP (X) repeatedly to advance the video picture one frame at a time.

4.To return to playback, press PLAY (N).

Note:

After 5 minutes in STILL mode the DVD+VCR stops to protect the tape and video heads.

Operation

19

Image 19
Contents V1310MZ.NA1ULZENG Installation and Operating Guide WarrantyRegulatory Information FCC Part Important Safety Instructions Contents Moisture Condensation Symbol Used in this ManualAbout the Remote Control About the Symbol DisplayRegional code Types of Playable DiscsSelecting the Viewing Source LINE2 VIDEO/AUDIO L/R Front PanelDVD VCRBackward / Forward m / M Remote ControlDVD OUT Rear PanelCable TV Connecting an Antenna or Cable TVBasic TV Connections AntennaOptional TV Connections Connection to an Amplifier Accessory Audio/Video A/V Connections toDigital Multi-channel sound Manual Clock Set Initial Settings VCRGeneral Operation Auto Clock SetAudio Output STEREO/LEFT/RIGHT Auto Channel ProgrammingTo Add or Erase Channels Broadcast Type STEREO/SAP/MONOTo go to the next level Initial Settings DVDDisplaying Disc Information on-screen DVD To display and exit the MenuTV Aspect Display ModeMenu Language Disc Audio / Subtitle / MenuVocal Dolby Digital / DTS / MpegSample Freq. Frequency DRC Dynamic Range ControlArea Code Password Security CodeLock Parental Control RatingVCR Tape Playback Hi-Fi Stereo Audio Sound VHS Hi-Fi Stereo MTS BroadcastSlow Motion CM Skip Commercial SkipTo pause the recording Timer RecordingVCR Tape Recording Basic InstructionsProgram Priority Checking or Erasing the Timer ProgramExtending the Recording Time Instant Timer RecordingRecording from External Components Checking the Recording TimeCopying from DVD to VCR On-Screen Display VCREasy Information Additional VCR InformationVCR Auto Play System VHS Quasi Playback SqpbDiscs Playback SetupGeneral features Buttons OperationsTime Search DVD DivX Additional featuresButtons Operations Discs 3D SurroundScreen Saver Marker Search DVD DivX To enter a MarkerTo Recall or Clear a Marked Scene Last Scene Memory DVD ACDProgrammed Playback Playing an Audio CD or MP3/WMA fileID3 TAG Viewing a Jpeg Disc Playable Codec format Playing a DivX Movie filePlayable DivX file Playable Subtitle formatPlaying a DVD VR format Disc Maintenance and ServiceReference Symptom Cause Correction TroubleshootingDVD+VCR General SpecificationsVCR Specifications DVD SpecificationsPage For Warranty Service Warranty Period HOW Service is HandledCustomer INTER-ACTIVE Center Numbers