LG Electronics XBV613 Additional VCR Information, VCR Auto Play System, VHS Quasi Playback Sqpb

Page 25

Additional VCR Information

•During manual recording, timer recording, Instant Timer Recording, playback, or fast forward modes, the DVD+VCR automatically starts rewinding the tape at the end of the tape. The cassette stops at the beginning of the tape and is ejected.

•After you have finished using the DVD+VCR, rewind, eject, and remove the cassette. Place the cassette in its protective sleeve to protect it from dust. It is not necessary to rewind the cassette before removing it, but if you do, it is ready to play or record the next time you use it.

•Be sure the DVD+VCR channel selector is on the correct channel you wish to record. The channel that is being recorded can always be checked by setting the television on the DVD+VCR channel (CH 3 or 4) and pressing the TV/VCR to turn the DVD+VCR’s TV indicator off.

•Do not attempt to hook up more than one televi- sion set to the DVD+VCR for either recording or playback.

VCR Auto Play System

This DVD+VCR features automatic playback.

When you load a tape with the safety tab removed the following occurs:

•The Output Source is changed to VCR mode automatically.

•The power turns on automatically and playback begins.

•At the end of the tape, the DVD+VCR stops, then rewinds.

•The tape is ejected after rewinding and the turns itself off automatically.

Note:

Auto power off does not function during regular DVD play mode. (DVD+VCR power stays on.)

S-VHS Quasi Playback (SQPB)

•This DVD+VCR can play back S-VHS recorded tapes, however, it cannot make recordings using S-VHS format tapes.

•SQPB is an abbreviation for S-VHS Quasi Playback.

Easy Information

If the Extended Data Service (XDS) signals are pro- vided along with normal TV signal in your area or dur- ing playback of a tape recorded with Extended Data Service (XDS) signals, the station ID, program title, and program details are shown on the TV screen. When viewing a channel with Extended Data Service (XDS) signals, press ENTER/OK and the station ID will appear on the TV screen. Press ENTER/OK again and the program details will appear on the TV screen. When viewing a tape recorded with Extended Data Service (XDS) signals, press ENTER/OK twice and the program title and program details will appear on the TV screen.

Program Details

LENGTH: Indicates the run length of a program.

TIME REMAINING: Indicates the remaining time of a program.

RATING: Indicates the rating of the current program (N/A, G, PG, PG-13, R, NC-17, X and Not Rated). The rating N/A means that the motion picture ratings are not applicable to this program.

CH 4

SP WABC STEREO

“Home video”

 

APR 30 , SAT

2:15 PM

Easy Information Screen

(Station ID)

PROGRAM DETAILS “Home video”

LENGTH 01:00

TIME REMAINING 00:26

RATING N/A

Easy Information Screen

(Program details)

Operation

25

Page 24 Page 26
Image 25
Page 24 Page 26
Contents V1310MZ.NA1ULZENG Installation and Operating Guide WarrantyRegulatory Information FCC Part Important Safety Instructions Contents About the Remote Control Symbol Used in this ManualAbout the Symbol Display Moisture CondensationRegional code Types of Playable DiscsSelecting the Viewing Source DVD Front PanelVCR LINE2 VIDEO/AUDIO L/RBackward / Forward m / M Remote ControlDVD OUT Rear PanelBasic TV Connections Connecting an Antenna or Cable TVAntenna Cable TVOptional TV Connections Connection to an Amplifier Accessory Audio/Video A/V Connections toDigital Multi-channel sound General Operation Initial Settings VCRAuto Clock Set Manual Clock SetTo Add or Erase Channels Auto Channel ProgrammingBroadcast Type STEREO/SAP/MONO Audio Output STEREO/LEFT/RIGHTDisplaying Disc Information on-screen DVD Initial Settings DVDTo display and exit the Menu To go to the next levelMenu Language Display ModeDisc Audio / Subtitle / Menu TV AspectSample Freq. Frequency Dolby Digital / DTS / MpegDRC Dynamic Range Control VocalLock Parental Control Password Security CodeRating Area CodeVCR Tape Playback Slow Motion VHS Hi-Fi Stereo MTS BroadcastCM Skip Commercial Skip Hi-Fi Stereo Audio SoundVCR Tape Recording Timer RecordingBasic Instructions To pause the recordingProgram Priority Checking or Erasing the Timer ProgramRecording from External Components Instant Timer RecordingChecking the Recording Time Extending the Recording TimeCopying from DVD to VCR On-Screen Display VCRVCR Auto Play System Additional VCR InformationVHS Quasi Playback Sqpb Easy InformationGeneral features Playback SetupButtons Operations DiscsButtons Operations Discs Additional features3D Surround Time Search DVD DivXTo Recall or Clear a Marked Scene Marker Search DVD DivX To enter a MarkerLast Scene Memory DVD ACD Screen SaverProgrammed Playback Playing an Audio CD or MP3/WMA fileID3 TAG Viewing a Jpeg Disc Playable DivX file Playing a DivX Movie filePlayable Subtitle format Playable Codec formatPlaying a DVD VR format Disc Maintenance and ServiceReference Symptom Cause Correction TroubleshootingDVD+VCR VCR Specifications SpecificationsDVD Specifications GeneralPage For Warranty Service Warranty Period HOW Service is HandledCustomer INTER-ACTIVE Center Numbers
Top Page Image Contents