LG Electronics 26-3DCH-UA Installer Overview, Operating Installer Menu, LG Installer Remote

RECEIVE

P A G E

TV Link Loader-Demo

TLL1100A Ready

MODE

ENTER

Installer Overview

Operating Installer Menu

To set up the controls for the TV you will need to know how to enter the TV Installer menu and make changes to the default values. If necessary, familiarize yourself with the TV Installer menu and how to make and save changes to the items in the menu.

LG Installer Remote

You will need an LG Installer remote control similar to the one shown to the right. The installer remote must have a “Source” but- ton or its equivalent. The remote shown for reference in this manual has “INPUT” -- this button serves the purpose of a Source button.

The TV’s clonable features need to be set up. This is a critical step. If the Master TV display panel’s clonable features like added channel icons or channel labels are not done correctly, then the cloned TVs will all have problems. Refer to the TV menus for other TV features: Picture, Audio, Option, Closed captions, Lock (V-Chip), etc.

TLL-1100A Clone Programmer

The TLL-1100A is a very simple cloner to use. It can be set up to clone a master TV setup and transfer it into a target TV. Cloning is possible using MPI proto- col. Be sure the Master TV is set up completely.

MENUCloning is only possible when the signal source is an Analog channel, not a digital channel. Refer to TLL- 1100A instruction manual supplied with the cloner.

SEND

TLL1100A

HOSPITAL PTC INSTALLER MENU

000 INSTALLER SEQ	000
UPN 000-000-000-000	FPGA E0F1
PTC V1.00.000	CPU V3.06.00

Typical Installer Menu

INPUT		MODE
TV	POWER	TV
INPUT		DVD
MULTI		VCR
EZ PIC	EZ SOUND SWAP	INFO

CC MENU RATIO

EXITSAP

ENTER

	TIMER
VOL	CH PAGE

MUTE

1 2 3

4 5 6

7 8 9

0	FLASH
	BACK

1 2 206-4071