Making a Master TV

Reference: Detailed Information For Making A Master TV

IMPORTANT INSTALLER SETUP INFORMATION! PLEASE READ THE FOLLOWING...

To set up a master TV you will need to know how to enter the TV Installer menu and make changes to

the default values as required. If necessary, famil- iarize yourself with the TV Installer menu and how to make and save changes in the menu, before attempting to

clone the TV Master setup.

You will also need an LG Installer remote control similar to the one shown in the front of this manual. The installer remote must have a “Source” button or its equivalent. The remote shown in this manual has a “INPUT” button -- this button serves the purpose of a Source button.

Finally, the TV’s clonable features need to be set up. This is a critical step. If the Master TV display panel’s clonable features

like adding channel icons or channel labels, digital font closed caption options etc., are not correctly added, then the cloned TVs will all have problems.

As the cloning procedure is being performed, specific steps need to be done at the indicated times to create a correct mas- ter TV setup and cloned target TVs. Be sure to do each task as indicated. If a procedure or step is left out or not performed completely, cloning may not work. At each step, pay attention to assure the TV screen shows the proper message when cloning. If the message indicated does not appear, there is a problem with that step and cloning may not be successful. Cloning is only possible when the signal source is an Analog channel, not a digital channel.

Detailed Instructions

The following describes the procedure for preparing a Master TV for cloning and the procedure for adding Channel Icons and/or Labels.

Note 1: Disconnect all Aux inputs. Under certain conditions, Auto Tuning is disabled if there is an Aux input active.

Note 2: Under certain conditions, changes to the input mode of the RGB input will not take effect until the power is cycled (TV is turned Off and On). To avoid confusion, disconnect RGB input before entering the Installer menu.

1.Enter the TV installer menu.

a.Reset the internal controller to factory default by access- ing installer menu item 117 FACT DEFAULT, set it to 1 and press “ENTER”. The value will change back to 0 after the TV’s internal controller has been restored to factory default con- dition. This step will ensure that the TV channel memory will be the active channel list. Check the Status LED inside the TV. If it is blinking rapidly, the TV channel map is in use.

b.Within the Installer menu, set the Installer menu items to the configuration required of your institution.

c.It is important to set the tuning band at this time, set Installer menu item 03 BAND/AFC. Default is 001 CATV.

d.Set Installer menu item 28 – CH OVERIDE to 001 to allow access to Auto Tuning and Channel Edit options in the Channel Menu. Exit the Installer menu.

2.Access the Master TV menus and set the clonable options on the menus to the desired configuration. Refer to the Clonable Menu Features Chart in this manual.

3.Run Auto Tuning to find analog and digital channels.

4.Enter the Channel Edit menu and edit the channel lineup to include the Free-To-Guest Channels only.

5.Assign ICONs to the channels using the Channel Label Menu. Note: You can add Channel ICONS typically network logos like ABC, NBC, PBS etc. in this step. Or, in Step 7, add Channel ICONS or labels for channels without Icons.

6.Transfer the TV setup: Enter the TV installer menu. Press ‘2’, ‘5’, ‘5’, ‘MENU’ to start the transfer of the TV’s setup to the TV internal controller. Once the transfer is complete, the system will exit the Installer menu. Check the Status LED inside the TV. It should be blinking slowly (1 blink per sec- ond). Note: The maximum number of active channels and Aux sources that can be transferred is 140. Total channels numbering more than 140 will result in erratic TV operation.

7.Edit/Add Channel ICONs and Channel Labels as needed.

Enter Installer menu. With menu displayed, press 2-5-4 + MENU. See the following page for detailed instructions:

-Editing/Adding Channel ICON and Labels on Master TV

-Changing a Channel’s ICON on Master TV

-Changing/Adding Channel Labels on Master TV

-Changing Source Labels on Master TV

8.Verify Master TV setup and feature configuration:

•Did you add Channel ICONS?

•Did you add Channel Labels?

•Did you add Source Labels?

•Did you adjust all TV menu options as required?

After verifying master setup, enter the TV Installer menu and set Installer menu item 28 CH OVERIDE to 000. Press ENTER to remove and exit the Installer menu.

P A G E 4 0

206-4071

26-3DCH-UA, 32-3DCH-UA specifications

LG Electronics has consistently pushed the envelope in the realm of innovative technology, and the release of the 32-3DCH-UA and 26-3DCH-UA models stands testament to their commitment to delivering high-quality, immersive experiences. These models are designed to cater to a variety of consumers, whether for home entertainment or professional use, embodying LG's reputation for excellence in display technology.

The LG 32-3DCH-UA, featuring a vibrant 32-inch screen, is particularly beneficial for those who value space-efficient designs without compromising on quality. This model encompasses a high-definition resolution that ensures sharp, clear images, making it ideal for watching films, playing video games, or video conferencing. The 26-3DCH-UA, with its slightly smaller display, is equally impressive, offering a resolution that provides an exceptional viewing experience.

Both models are built with advanced panel technologies that deliver remarkably accurate color reproduction and wide viewing angles. They incorporate LG’s proprietary ips technology, which enhances the vividness and clarity of the images displayed. This ensures that users enjoy consistent colors from various angles, making these screens perfect for group viewings.

In terms of audio-visual technology, the 32-3DCH-UA and 26-3DCH-UA come equipped with built-in speakers that offer immersive sound quality, enhancing the overall viewing experience. Furthermore, LG has integrated various connectivity options, including HDMI, USB, and Bluetooth capabilities, allowing users to seamlessly connect their devices for streaming or presentations.

Another standout feature is the 3D capability, which is particularly appealing for avid movie watchers and gamers who want to dive deeper into their visual experience. LG’s 3D technology enables users to experience their favorite content in a new dimension, providing a more engaging and interactive entertainment option.

In addition to these impressive features, both models boast energy-efficient designs which translate to lower energy consumption without sacrificing performance. Their sleek, modern aesthetics also make them a visually appealing addition to any living space or office environment.

Lastly, with LG's focus on user-friendly interfaces and features, both the 32-3DCH-UA and 26-3DCH-UA are equipped with intuitive controls and customizable settings. This allows users to tailor their viewing experience to their specific needs and preferences, ensuring satisfaction with every use.

In conclusion, the LG 32-3DCH-UA and 26-3DCH-UA represent a merging of cutting-edge technology, user-friendliness, and aesthetic design, making them strong contenders in the modern display market. These models exemplify LG's dedication to providing products that elevate the enjoyment of visual media while catering to the diverse needs of consumers worldwide.