LG Electronics 32-3DCH-UA setup guide Cloning Connections/Learning Setup, Before you begin cloning

Page 31

Cloning Connections/Learning Setup

Connections for the LT2002 Clone Programmer to Learn the TV Master TV Setup

Antenna

or CATV

Warning: Do not use LT2002 while any PPV card is installed in TV or clone programmer device

THE CLONE HAS CONTROL OF THE TV

THE CLONE IS VERSION

XX

THE TV IS VERSION

XX

THE SW IS REVISION

XX

CLONE CLOCK

= XX:XX

 

TV CLOCK

= XX:XX

 

-PRESS ANY KEY TO CONTINUE.

-DISCONNECT CLONE WHEN DONE.

Ferrite Core (TDK, ZCAT

2035-0930)

Connect cable to

 

 

 

 

TV MPI Jack and

 

 

Status

follow on screen

 

 

instructions

 

Indicator

 

 

 

 

 

MPI

Reset

Color

• green

battery ok

• red

battery low

Blink pattern

• slow

power on

 

no communications

• heartbeat

power on

 

communications ok

®

 

QuickSet II Programmer

LT2002

ZENITH ELECTRONICS CORPORATION, LINCOLNSHIRE, ILLINOIS USA

will be damaged.

Master TV

Clone Programmer

Notes: It is assumed that the TV is connected to a signal source, the source selected is Antenna (RF) In, the signal is from an Analog channel, not a digital channel, all equipment is connected to power and turned on and the LT2002 Clone Programmer main menu (THE CLONE HAS CONTROL OF THE TV) menu is displayed on the TV screen, see above and next page.

Before you begin cloning...

The Master TV should be connected to a good, stable signal from an over-the-air antenna or cable service Analog channel and connected to power. (See above.)

Teaching and Learning is only possible between identical model TV/STBs. (However, the LT2002 Clone programmer can store up to 3 different ‘master’ setups.)

WARNING: Copying a blank or incorrect memory into a TV, STB or other device will cause the TV, STB or other device to operate erratically or become inoperable.

Use an Installer’s remote to operate Learning and Teaching menus.

Make sure that the batteries in the Clone programmer are fresh.

If batteries are removed, the Clone Clock time will be lost.

Decide if you want to set the time from the Clone program- mer or copy the time to the Clone programmer; from a com- patible TV which has had the clock set to the current time.

Setting the time and transferring it to the Clone or other device is a separate procedure.

Follow the connection diagram above to connect the Clone to a Master TV display panel. After learning is complete, to another identical TV display panel to “teach” it the master TV setup.

See the Clone Troubleshooting section to resolve problems.

Turn to the next page to continue Cloning Setup.

206-4071

P A G E 3 1

Image 31
Contents Commercial Mode Setup Guide G E For Customer Support/Service, please callPower Cord Polarization Some models CleaningAccessories, Carts, and Stands Power SourcesSafety Check Power LinesDamage Requiring Service Replacement PartsTable of Contents Setup Checklist Verify TV Setup Commercial Mode Setup for Master TVSet Up TV Features See TV Menus section Run Auto Tuning Channel SearchSpeaker OUT 8-OHM Connect to 8 ohm external speaker input Typical Connections PanelRF Antenna Connection Input 2 Side Connections Panel / RF Antenna ConnectionRF Antenna Connect to Antenna / Cable input on MPI card MPI Card Slot MPI Card Removal / PPV Card InstallationG E 1 Pedestal Mounts and Stands Wall MountsTLL-1100A Clone Programmer Installer OverviewOperating Installer Menu LG Installer RemoteTV Overview Installing Batteries in Installer Remote Control Typical Installer Multi-Brand Remote ControlPower Installer Remote Control Typical Key FunctionsPillow Speaker Interface Pillow Speaker Setup Pillow Speaker ControlControlling the TV with Mechanical Switches Pillow Speaker ConnectionsChannelpictureaudio Time Option Basic TV Features SetupPurpose Auto Tuning Channel SearchChannel Menu Channel Menu NavigationPicture Menu Picture ModePicture Menu Navigation G E 2 Sound ModeAudio Menu Audio Menu NavigationTime Menu Sleep TimerTime Menu Navigation Option Menu Navigation Option MenuCaption Lock Menu Navigation Lock MenuLock System Channel Banks Overview Channel Banks menu, use the Left-Right arrows to select Channel Banks Setup Installer Remote Control Key FunctionsSelecting Deleted Channels Channel Banks SetupInactive TV Setup for Channel Bank Adding / Deleting / Blanking ChannelsReference Channel Banks Worksheet Date Installer LocationOptional Edit/Change File Name Upgrading TV Software with USB Memory CardUpgrading TV Software On USB Memory CardOn Target TV, Teach Master TV Profile On Master TV, Create Profile and LearnOn Target TV TLL-1100A Clone Connections / Learning and Teaching SetupsOn Master TV On TLL-1100AMaster TV Clone Programmer Cloning Connections/Learning SetupTurn to the next page to continue Cloning Setup Before you begin cloningSet the Clock Optional Cloning Learning Setup Learning the Master TV SetupLearn Setup from Master TV LT2002 Clone Programmer Communication ProblemsDisconnect TV Power for 15 Seconds Teach Master TV’s Setup to the target TVTarget TV Clone Programmer Installer Menu Items 000 through Installer MenuAccessing the Installer’s Menu Using the Installer’s MenuInstaller Menu Items 031 through Detailed Descriptions of Installer Menu Items OLD OCV On Command VideoTM IR Banks EN IR Banks EnableEN Timer Enable On/Off Timers AlarmChksm Error Checksum Error Rear AUX EN. Rear Aux EnableDIS. CH-TIME Disable Channel-Time EN. CH-T COL. Enable Text Custom ColorPermanent BLK Permanent Block DEF. ASP. Ratio Default Aspect RatioVideo Mute EN Video Mute Enable Set to 0 for normal Fact Default Factory Default Set to 0 for normalEdit/Add Channel ICONs and Channel Labels as needed Reference Detailed Information For Making a Master TVMaking a Master TV Detailed InstructionsAdding Channel Icons and Labels in the 2-5-4 + Menu Mode Reference Checking Software Version Reference Clonable Menu FeaturesClonable Menu Features Procedure for Checking Software VersionIf Upgrade Menu Does Not Appear USB Cloning TroubleshootingCamport Operation Stand-Alone TV Camport Auto Sense OperationCamport Operation PPV Lumin TV Aux Input ConfigurationPower Savings Setup Picture PowerTroubleshooting Problem Possible Causes Possible Solutions Clone Programmer Reference LT2002 Cloning Procedure TroubleshootingReset Clone After Static Shock Clone Programmer TroubleshootingProblem Channel Banks Setup TroubleshootingSolution Controller Quick Check Troubleshooting Flow ChartG E 5 Commercial Mode CheckRGB Red, Green, Blue Glossary of TermsRS-232 For Customer Support/Service Please call

26-3DCH-UA, 32-3DCH-UA specifications

LG Electronics has consistently pushed the envelope in the realm of innovative technology, and the release of the 32-3DCH-UA and 26-3DCH-UA models stands testament to their commitment to delivering high-quality, immersive experiences. These models are designed to cater to a variety of consumers, whether for home entertainment or professional use, embodying LG's reputation for excellence in display technology.

The LG 32-3DCH-UA, featuring a vibrant 32-inch screen, is particularly beneficial for those who value space-efficient designs without compromising on quality. This model encompasses a high-definition resolution that ensures sharp, clear images, making it ideal for watching films, playing video games, or video conferencing. The 26-3DCH-UA, with its slightly smaller display, is equally impressive, offering a resolution that provides an exceptional viewing experience.

Both models are built with advanced panel technologies that deliver remarkably accurate color reproduction and wide viewing angles. They incorporate LG’s proprietary ips technology, which enhances the vividness and clarity of the images displayed. This ensures that users enjoy consistent colors from various angles, making these screens perfect for group viewings.

In terms of audio-visual technology, the 32-3DCH-UA and 26-3DCH-UA come equipped with built-in speakers that offer immersive sound quality, enhancing the overall viewing experience. Furthermore, LG has integrated various connectivity options, including HDMI, USB, and Bluetooth capabilities, allowing users to seamlessly connect their devices for streaming or presentations.

Another standout feature is the 3D capability, which is particularly appealing for avid movie watchers and gamers who want to dive deeper into their visual experience. LG’s 3D technology enables users to experience their favorite content in a new dimension, providing a more engaging and interactive entertainment option.

In addition to these impressive features, both models boast energy-efficient designs which translate to lower energy consumption without sacrificing performance. Their sleek, modern aesthetics also make them a visually appealing addition to any living space or office environment.

Lastly, with LG's focus on user-friendly interfaces and features, both the 32-3DCH-UA and 26-3DCH-UA are equipped with intuitive controls and customizable settings. This allows users to tailor their viewing experience to their specific needs and preferences, ensuring satisfaction with every use.

In conclusion, the LG 32-3DCH-UA and 26-3DCH-UA represent a merging of cutting-edge technology, user-friendliness, and aesthetic design, making them strong contenders in the modern display market. These models exemplify LG's dedication to providing products that elevate the enjoyment of visual media while catering to the diverse needs of consumers worldwide.