Channel Banks Setup

Use the Channel Banks to format the channel lineup programming package options for the end user

Each channel bank is capable of storing broadcast digital and analog channels

Figure 1. Typical					channel banks after running							Auto Tuning

	B	Purpose														Channel Number
	A
	A			1		2	3	4	5	6	7		8	9	10		1 1		12	13	14		1 5		16		17		18		19		20		21	22		2 3		24		2 5
	N			1		2	3	4	5	6	7		8	9	10		1 1		12	13	14		1 5		16		17		18		19		20		21	22		2 3		24		2 5
	K



	1					A			A		A			A								A		A		A		A		A		A		A			A		A		A		A
	2					A			A		A			A								A		A		A		A		A		A		A			A		A		A		A
	3					A			A		A			A								A		A		A		A		A		A		A			A		A		A		A

	4					A			A		A			A								A		A		A		A		A		A		A			A		A		A		A

A = Active - - Channel was found during AUTO TUNING
Figure 2. Typical channel banks after running Auto Tuning, and customizing with Add/Del/Blnk

	B	Purpose														Channel Number
	A
	A			1		2	3	4	5	6	7		8	9	10		11		12	13	14		1 5		16		1 7		18		19		20		21	22		23		24		2 5
	N			1		2	3	4	5	6	7		8	9	10		11		12	13	14		1 5		16		1 7		18		19		20		21	22		23		24		2 5
	K



	1		Basic		BC	A			A		A			A				A				D		D		D		D		D		D		D			D		D		D		D
	2		Extend		BC	A			A		A			A				A				A		D		A		D		A		A		A			D		D		D		D
	3		All CTV		BC	A			A		A			A				A				A		D		A		D		A		A		A			A		D		A		A

	4		Other		BC	A			A		A			A				A				A		A		A		A		A		A		A			A		A		A		A

A		= Active					Channel was found during AUTO TUNING
D			= Delete				Channel was deleted using Add/Del option.
BC			= Blanked Channel				Channel was			blanked using BLANK channel option (ADD/DEL/BLNK).

Adding / Deleting / Blanking Channels

It is best to do ADD / DEL customizing before doing “BLANK.” Auto Tuning (channel search) enters the same channel numbers in channel banks 1, 2, 3 and 4. Auto Tuning removes any chan- nels previously customized with ADD / DEL / BLANK. The chan- nels found in the channel search on your antenna / cable will be included, and any channels previously found but not current- ly available will not be included. ADD and DEL (not BLANK) can be used independently for channel banks 1, 2, 3 and 4. (If a channel is not found in the channel search, it can be added see the Channel Menu Manual Tuning option.)

Notes: A channel blanked, is blanked in all channel banks.

Selecting Deleted Channels

To tune to a Normal Delete channel: Select a Channel Bank where the channel is added. Or, direct enter the channel num- ber then go to the bank where the channel is set as ‘Normal

Delete’ and reconfigure the channel status.

Note: Ch Override must be set to 001 to allow access to the channel scan.

Channel allocations in tuning bands:

•Broadcast and Broadcast Digital: 2 - 69

•CABLE - CATV, HRC or ICC: 1 - 125

Inactive TV Setup for Channel Bank 4

To create an inactive TV display on Channel Bank 4, select Normal Delete for every channel in Bank 4. When Bank 4 is selected with the bank button on installer remote, the Inactive TV, call attendant will be shown on the TV screen. The TV will turn itself off afterward. This will prompt the patient to arrange for an available programming package on Banks 1, 2 or 3.

P A G E 2 6

206-4071

LG Electronics 26-3DCH-UA, 32-3DCH-UA Channel Banks Setup, Adding / Deleting / Blanking Channels