Connections
ips
Depending on your TV and other equipment you wish to connect, there are various ways you could connect the recorder. Use only one of the connections described below.
Please refer to the manuals of your TV, VCR, Stereo System or other devices as necessary to make the best connections.
Caution
–Make sure the DVD Recorder is connected directly to the TV. Tune the TV to the correct video input channel.
–Do not connect the DVD Recorder’s AUDIO OUT jack to the phono in jack (record deck) of your audio sys- tem.
–Do not connect your DVD Recorder via your VCR. The DVD image could be distorted by the copy pro- tection system.
Connecting to the Aerial
Remove the aerial cable plug from your TV set and insert it into the aerial socket at the back of the DVD recorder. Plug one end of the aerial cable into the TV socket on the DVD recorder and the other end into the aerial input socket on your TV set.
RF coaxial connection
Connect the RF. OUT jack on the DVD Recorder to the aerial input jack on the TV using the
Rear of TV
Aerial |
|
|
| SCART INPUT |
|
ANTENNA | AUDIO INPUT | VIDEO |
INPUT |
| INPUT |
| LR |
|
R
Connections to Your TV
Make one of the following connections, depending on the capabilities of your existing equipment.
Video connection
Connect the VIDEO OUT jack on the DVD Recorder to the video in jack on the TV using the video cable (V).
Connect the
Component Video connection
Connect the COMPONENT VIDEO OUT jacks on the DVD Recorder to the corresponding input jacks on the TV using an Y Pb Pr cable (C).
Audio (Left/Right) Connection
Connect the left and right AUDIO OUT jacks of the DVD Recorder to the audio left and right IN jacks on the TV using the audio cables (A). Do not connect the DVD Recorder’s AUDIO OUT jack to the phono in jack (record deck) of your audio system.
Rear of TV
SCART INPUT
COMPONENT VIDEO INPUT | AUDIO INPUT | VIDEO | ||||
INPUT | INPUT | |||||
| Y | Pb | Pr | L | R |
|
S C A V
DVR HOOKUP
Rear of DVD Recorder
Rear of DVD Recorder
15