NEC NDR50 owner manual Remote Control Operation Range, Reset the DVD Recorder

DVD Recorder Overview (Continued)

Restrictions on video recording

•You cannot record copy-protected video using this recorder. Copy-protected video includes DVD-Video discs and some satellite broadcasts. If copy-protected material is encountered during a recording, recording will pause or stop automatically and an error message will be displayed on-screen.

•Video that is ‘copy-once only’ can only be recorded using a DVD-RW disc in VR mode with CPRM (see below).

•NTSC format signals from the analog or the DV inputs is not recorded correctly with this recorder.

•Video signals in SECAM format (from the built-in TV tuner or from the analog inputs) are recorded in PAL format.

What is ‘CPRM’?

CPRM is a copy protection system (with scramble sys- tem) only allowing the recording of ‘copy once’ broad- cast programs. CPRM stands for Content Protection for Recordable Media.

This recorder is CPRM compatible, which means that you can record copy-once broadcast programs, but you cannot then make a copy of those recordings. CPRM recordings can only be made on DVD-RW discs format- ted in VR mode, and CPRM recordings can only be played on players that are specifically compatible with CPRM.

Copyright

•Recording equipment should be used only for lawful copying and you are advised to check carefully what is lawful copying in the country in which you are mak- ing a copy. Copying of copyright material such as films or music is unlawful unless permitted by a legal exception or consented to by the rights owner.

•This product incorporates copyright protection tech- nology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision cor- poration. Reverse engineering or disassembly is pro- hibited.

Remote Control Operation Range

Point the remote control at the remote sensor and press the buttons.

Remote Control Battery Installation

Detach the battery cover on the rear of the remote control, and insert two R03 (size AAA) batteries with and aligned correctly.

Caution

Do not mix old and new batteries. Never mix different types of batteries (standard, alkaline, etc.).

Reset the DVD Recorder

If you observe any of the following symptoms...

The unit is plugged in, but the power will not turn on or off.

The front panel display is not working.

The DVD Recorder is not operating normally.

...you can reset the DVD Recorder as follows:

Press and hold the POWER button for at least five seconds. This will force the unit to power off.

Press the POWER button again to turn the unit back on.

Unplug the power cord, wait at least five seconds, and then plug it in again.

INTRODUCTION

9