~“ .&
The clock must be set for the automatic oven timing functions to work properly. The time of day cannot be changed during a Timed Bake or CLEAN cycle.
To Set the Clock
1.Press the
CLOCK CLOCK pad.
c1
2.Press the INCREASE or DECREASE pad to set the time of day.
Timer
The timer is a minute timer only.
The timer does not control oven operations. The maximum setting on the timer is 9 hours and 55 minutes.
To Set the Timer
1.Press the
TIMER TIMER pad.
c1
2.Press the INCREASE or DECREASE pad to set the amount of time on timer.
The timer will start automatically within a few seconds of releasing the pad.
The timer, as you are setting it, will display seconds until 1 minute is reached.
Then it will display minutes and seconds until 10 minutes is reached.
After 10 minutes, it will display hours (“HR” now appears in display) and minutes until the maximum time of 9 hours and 55 minutes is reached.
To Reset the Timer | To Cancel the Timer |
If “TIMER” is displayed, press the INCREASE or DECREASE pad until the desired time is reached.
If “TIMER” is not displayed, press the TIMER pad first, then follow the instructions above to set the timer.
Press and hold the TIMER pad until the word “TIMER” disappears from the display.
End of Cycle Tone
The end of cycle tone is a series of 3 beeps followed by I beep every 6 seconds. If you would like to remove the signal that beeps every 6 seconds. press tind hold the CL. EAR/OFF pad for 10 seconds.
To return the signal that beeps every 6 seconds, press and hold the CLEAR/OFF pad for 10 seconds.
Display Messages
If “door” appears on the display, the door latch handle is not moved all the way to the right. Move the latch handle and cleaning will start. If “LOCK” appears in the display, the oven door is in the locked position. BAKE, BROIL and COOK TIME cannot be set if’ the door is in the locked position.
Power Outage
Atlcr a power outage, when power is restored. the display will flash and
,: shown will no Iongcr be
7
