GE JGRP16 Light Replacement, Oven Shelves, Control Panel, Painted Surfaces, Glass Surfaces

C m Light Replacement

CAUTION: Before replacing your oven light bulb, disconnect the electric power for your oven at the main fuse or circuit breaker panel.

Be sum to let the light cover and bulb cool completely before removing or replacing them. When in use, light bulbs can become warm enough to break if touched with a nl{)ist cloth or towel. When cleaning, avoid touching warm lights with cleaning cloths if the light cover is removed.

The o~en light (bulb) is covered with a removable glass cover which is held in place with a wire. Remove the oven door, if desired, to reach the cover easily.

y;,..,-,,/ Iiila

To remove:

●Hold your hand under the cover so it doesn’t fall when released. With fingers of the same hand,

firmly push back the wire cover holder. Lift

off the cover. Wire cover hblder

DO NOT REMOVE ANY SCREWS.

●Replace bulb with 40-watt home appliance bulb.

To replace cover:

●Place it into the groove of the light receptacle. Pull the wire forward to the center of cover until it snaps in place. When in place, the wire holds the co~er firmly. Be certain the wire is in the depression in the center of the cover.

●Connect electric power to the oven.

Oven Shelves

The oven shelves may be cleaned with an abrasive

cleanser or steel wool. After cleaning, rinse the ~b-l.es with clean water and dry with a clean cloth.

N~ i’E: The oven shelves may be cleaned in the self-cleaning oven. However, the shelves may darken in color, lose their luster and become hard to slide. Wipe the shelf supports with cooking oil after self- cleaning to make the shelves slide more easily.

Control Panel

It’s a good idea to wipe the control panel after each use of the oven. Clean with mild soap and water or vinegar and water, rinse with clean water and polish dry with a soft cloth.

Do not use abrasive cleansers, strong liquid cleaners, plastic scouring pads or oven cleansers on the control panel—they will damage the finish.

A 50/50 solution of vinegar and hot water works well.

Painted Surfaces

Painted surfaces include the outside oven door, control panel and drawer front. Clean these with soap and water or a vinegar and water solution. Do not use commercial oven cleaners, cleansing powders, steel wool or harsh abrasives on any painted surface.

Glass Surfaces

To clean the outside glass finish, use a glass cleaner. Rinse and polish with a dry cloth. Do not allow the water or cleaner to run down inside the openings in the glass while cleaning.

(con finud rwrfpuge)

23