NEC NDR50 Check that the DV audio input is as you require, Want to the recording to start from

ote

If your source is copy-protected using CopyGuard, you will not be able to record it using this recorder. See Copyright on page 9 for more details.

6

Recording will start. (The REC indicator lights in the display window.)

Recording continues until you press STOP (x) or the disc is full.

To record for a fixed length of time, see Instant Timer Recording on page 39.

Press STOP (x) to stop recording.

5

HQ; High Quality, SQ; Standard Quality, LQ: Low Quality,

EQ: Extended Quality

Press REC (z) once.

Recording from an External Input Recording from External Components

You can record from an external component, such as a camcorder or VCR, connected to any of the recorder’s external inputs.

Make sure that the component you want to

1 record from is connected properly to the DVD Recorder. See page 17.

Press AV repeatedly to select the external input

2 to record from.

• Tuner: Built-in tuner

• AV1: AUDIO AV IN 1 / VIDEO IN 1 mounted on back panel

• AV2: INPUT 2 (VIDEO, AUDIO (L/R), S-VIDEO IN) mounted on front panel

• DV: DV IN mounted on front panel

3 Load a recordable disc.

Select the recording mode as necessary by

4 pressing REC MODE repeatedly. (HQ, SQ, LQ, EQ)

Recording from a Digital Camcorder

You can record from a digital camcorder connected to the DV IN jack on the front panel of this recorder. Using the recorder’s remote, you can control both the cam- corder and this recorder.

Before recording, make sure that the audio input for the DV IN jack is set up (see page 26).

ips

•The source signal must be DVC-SD format.

•Some camcorders cannot be controlled using this recorder’s remote.

•If you connect a second DVD Recorder using a DV cable, you cannot control the second DVD from this one.

•You can’t control this unit remotely from a component connected to the DV IN jack.

•You can’t record date and time information from a DV cassette.

1to the front panel DV IN jack. See page 17.Make sure your digital camcorder is connected

Check that the DV audio input is as you require.

2 You can choose between Audio 1 (original audio) and Audio 2 (overdubbed audio).

• DV Input is set from the DV Rec Audio in sub-menu of the Setup menu. See DV Rec Audio on page 26 for more information.

Press AV repeatedly to select the DV input.

3 DV appears in the display window and on the TV screen.

4want to the recording to start from.

For best results, pause playback at the point from which you want to record.

•Depending on your camcorder, you can use this

recorder’s remote to control the camcorder using the

STOP, PLAY and PAUSE functions.Find the place on the camcorder tape that you

5Press REC (z) once to start recording.

•Recording is automatically stopped if the recorder detects no signal.

•You can pause or stop the recording by pressing PAUSE/STEP (X) or STOP (x). You cannot control the camcorder from this remote control during recording.

•In Video mode, the final frame of the recording may remain displayed on screen for a while after recording stops.

•For timer recording to work properly on this recorder, the digital camcorder must also be switched on and in operating.

RECORDING

41