Controls, Battery installation

7. PC AUDIO IN cable

5. Owner’s manual

4. PC ANALOG IN cable

3. Remote controller

2. Batteries (2EA)

L Make sure the following accessories are provided with Product. 1. AC cord

Supplied Accessories

Controls

1. ON/OFF Switches TV set on or off. 2. MENU Displays a menu. 3. + PR - (Programme Up/Down) Selects a programme or a menu item. 4. + VOL - (Volume Up/Down) Adjusts the volume./ Adjusts menu settings. 5. TV/AV Selects TV, COMPONENT, S-VIDEO, PC-ANALOG or PC-DIGITAL mode./ Clears the menu frorn the screen.

6. Power Indicator

Illuminates in red when the TV is in standby mode./ Illuminates in green when the TV is switched on. Illuminates in blinked when the power save mode(only PC mode).

7. Remote control sensor

Accepts the IR signal of remote controller.

1.PC ANALOG(D-SUB) IN

2.PC DIGITAL(DVI-I) IN

3.PC AUDIO IN

Connect the audio cable from the PC Audo IN of the set.

4.HEADPHONE OUT

Connect a headphone to this socket.

5.Sub Woofer OUT

6.D-TV (720P/1080I) IN

7.COMPONENT IN

8.S-VIDEO IN

9.AV-OUT

10.AV-IN

11.ANT.

	Color TV	6. PC DIGITAL IN cable
	Wide LCD
		Model :N LT-40W
	40"
		Owner’s Manual

Battery installation

uInserting batteries

1.Remove the battery cover by pulling it upward in the direction shown by the arrow.

2.Insert the batteries with correct polarity ( "+" to "+", and "-" to "-" ).

3.Replace the battery compartment cover.

→ →

*Install two high-quality 1.5V "AAA" alkaline batteries. Don't mix old batteries with new batteries.

*Remove batteries when you won't use the remote controller for long time. Liquid leakage from old batteries may cause operation failure.

uNotes for using remote controller

•Make sure there are no objects between the remote controller and its sensor.

•Don't place the remote control near a heater or in damp place. Strong impact to the remote control may cause operation failure.

•Signal from the remote control may be disturbed by sun light or other bright light. In this case, darken the room or move the TV.