External Equipment Connection

S-VIDEO input

If using an S-VIDEOsource, the picture quality will be improved over a video source.

1. Connect the S-VIDEO output of a VCR to the S-VIDEOinput on the TV.

2. Connect the audio cables from the S-VIDEO VCR to the L (MONO) R inputs on the TV.

3. Select S-VIDEOmode by pressing the TV/AV button repeatedly.

4. Press the PLAY button on the VCR. The VCR playback picture appears on the screen.

Headphone jack

Insert the headphone plug to the headphone jack on the TV. You can listen to the sound through the headphone; no sound from the speaker on the TV. To adjust the headphone volume, use the nVolume menu in the Sound menu.

Sub woofer output

Connect the cable of the sub woofer to the sub woofer output on the TV.

You can listen to the bass well. To adjust the bass volume, use the Sub woofer menu in the sound menu.

External Equipment Connection

When connecting to other equipment, please ensure you turn the main switch OFF to prevent any damage to the equipment.

You can connect additional equipment, such as VCRs, camcorders etc. to your set. Examples are shown below.

Antenna connection

1.Connect RF out on the VCR to the Antenna input on the rear of the TV.

2.Connect the antenna cable to the antenna in jack

on the VCR.

3. Use the TV/AV button to select TV mode.

4. Press the PLAY button on the VCR.

COMPONENT INPUT

1. Connect the AV out jacks on the AV device to the COMPONENT on the TV.

2. Use the TV/AV button to select COMPONENT mode.

3. Press the PLAY button on the DVD.

DTV Input

1. Connect the DTV video output sockets(Y,Pb, Pr) of the DTV set top box to the COMPONENT Input sockets of the set.

2.Connect the audio cable from the DTV set top box to the Audio Input sockets of the set.

3. Press the TV/AV button to select DTV mode.