Other functions Sound Control, Auto sleep, Blue back

Other functions

Sound Control

TV, COMPONENT and S-VIDEO modes

(You can’t set PC mode in this menu. Use the TV/AV button)

External equipment inputs:S-VIDEO mode are used for video devices like VCRs, DVDs, etc.), COMPONENT mode is used for COMPONENT type devices.

Note : If a VCR is connected to the antenna jack, use TV mode. See External Equipment Connection section.

1.Press the MENU button.

2.Select the Special menu.

3.Press the PRxy button to select Input.

4.Press the VOLÏq button to select TV,

COMPONENT and S-VIDEO.

COMPONENT : Component device connected to the

COMPONENT jack.

S-VIDEO : S-VIDEO device connected to the TV's S-VIDEO Input.

To return to TV mode, press the TV/AV button.

Alternatively you can select the TV, COMPONENT, S-VIDEO, PC-ANALOG or PC-DIGITAL mode by pressing the TV/AV button.

Auto sleep

If you select Auto sleep on the set will automatically switch itself to standby mode approximately ten minutes after a TV Channel stops broadcasting.

1.Press the MENU button, select the Special menu, then press VOLÏqbutton.

2.Press the PRxy button to select Auto sleep.

3.Press the VOLÏq button to select On.

4.Press the TV/AV button to return to normal TV viewing.

Blue back

Special

Input	TV
Auto sleep	Off
Blue back	On
Auto wide	Off
	5-6=<>)>

You can select your preferred sound setting; Flat, Music, Movie or Speech and you can also adjust the sound frequency of equalizer, balance. If you switch AVL to on, the set automatically keeps on an equal volume level even if you change programme.

1.Press the MENU button.

2.Select the Sound menu, then press VOLÏqbutton.

3.Press the PRxy button to select the desired sound item; Equalizer, Balance, AVL Surround or headphone Volume.

4.Press the VOLÏq button to make desired adjustment.

5.Press the VOLÏq button in Equalizer to set the Equalizer.

6.Press the PRxy button to select your preferred setting ; Flat, Music, Movie, Speech or User. To set the Equalizer User.

a.Select User by pressing the PRxy button.

b.Select a sound band by pressing the VOLÏq button.

c.Make appropriate sound level with the PRxy button.

d.Press the MENU button to return to preceding MENU and the TV/AV button to return to normal TV viewing.

7.Select the Balance menu and adjust the balance of speakers.

8.Select the AVL(Automatic Volume Leveler) menu On or Off

9.Select the Surround menu On or Off.

10.Select the nVolume menu and adjust the volume from headphone.

11.Select the Sub woofer menu to adjust the bass volume.(It is possible when the Sub woofer is connected to the set.)

The sound Flat, Music, Movie and Speech are programmed for good sound reproduction at the factory and cannot be changed.

Sound

Equalizer
Balance	0
AVL	Off
Surround	Off
nVolume	30
Sub woofer	0
	5-6=<>)>

Equalizer

Flat

Music

Movie

Speech

User

3Pb

5-6=<>)>

Programme without a program signal appear in blue.

Auto wide (Aspect Ratio Control)

Press the ARC button to select a desired picture format. Each press of the ARC button, selects Auto Wide, 16:9, 14:9, ZOOM, 1:1 and Auto wide mode.

Auto Sound Control

SSM (Sound Status Memory)

1.Press the SSM button.

2.Press the SSM button repeatedly to select.

Each press of the button changes the screen display as below.

Flat Music Movie Speech User