Setting up TV Programme
Setting up TV Programme
Manual Programme
Manual Programme lets you manually tune and arrange the programme in whatever order you desire. Also you can assign a programme name with 5 characters to each programme number.
1.Press the MENU button.
2.Select the Setup menu, then press VOLÏq button.
3.Select Manual programme menu, then press VOLÏq button.
4.Press the PRxy button to select System.
5.Select a TV system with the VOLÏq button.
BG : (West Europe/Asia/M.East/Africa/Australia)
I: (UK/Hong Kong/South Africa) DK : (Russia/China/East Europe) M : (USA/Korea/philippines)
6.Press the PRxy button to select Channel.
7.Press the VOLÏq button to select V/UHF or Cable as required. If possible, select the programme number directly with the number buttons.
8.If the TV picture reception is not good, then do the
fine tuning. Select FINE, then adjust the received signal with the VOL Ïq button.
9.Press the PRxy button to select Search. Press the VOL Ïq button to commence searching. If a channel is found the search will stop.
10.Press PRxy button to select NAME.
Press VOL Ïq button to allocate the location and use PRxy button to select the character. (blank, +,
11.If this programme is the one required, press the PRxybutton to select Storage. Select the
desired programme number with the VOL Ïqbutton or NUMBER buttons.
12.Press the OK button to store it. The display Stored will appear.
To store another programme, repeat steps 5 to 10.
Manual programme
SystemBG
Channel V/UHF 5
Fine
Search
Name
Storage1
Once you have preset the programme, you will be able to use the PRxy or NUMBER buttons to scan the programme you programmed.
Programme can be tuned using Auto or Manual programme menu.
Auto Programme
All programme that can be received are stored by this method. It is recommended that you use Auto programme during installation of this set.
1.Press the MENU button.
2.Select the Setup menu, then press VOLÏqbutton.
3.Select the Auto programme menu, then press VOLÏqbutton.
4.Press the PRxy button to select System.
5.Select a TV system with the VOLÏq button;
BG : (West Europe/Asia/M.East/Africa/Australia)
I: (UK/Hong Kong/South Africa) DK : (Russia/China/East Europe) M : (USA/Korea/philippines)
6.Press the PRxy button to select Storage from.
7.Select the beginning programme number with the PRxy button or NUMBER buttons.
8.Select Start, then press VOLÏq button. Press MENU button to finish auto programme.
9.Press the TV/AV button to finish Auto programme.
10.Press the TV/AV button to return to normal TV viewing.
Auto programme
SystemBG
Storage from | 1 |
Start
13
12