Other functions
Calling the programme list
You can check the programmes stored in the memory by displaying the programme LIST.
Displaying programme list
1.Press the LIST button to display the Programme list menu. The programme list appears on the screen.
One programme list contains ten programmes as right.
Note :
a. You may find some blue programmes.
They have been set up to be skipped by auto programming or in the programme edit mode.
b. Some programmes with the channel number shown in the programme list indicate there is no station name assigned.
Selecting a programme in the programme list Select a progranne with the PRxy or VOLÏq button. Then press the OK button.
The set switches to the chosen programme number.
Paging through a programme list
There are 10 programme table pages in which contain 100 programmes.
Pressing the PRxy or VOLÏq button repeatedly turns the pages.
Programme list
0 | 5 |
16
27
38
49
19
Other functions
Sleep timer
You don’t have to remember to switch the set off before you go to sleep. The sleep timer automatically switches the set to standby after the preset time elapses.
Press the SLEEP button to select the number of minutes. The display will appear on the screen, followed by 0, 10, 20, 30, 60, 90, 120, 180 and 240. The timer begins to count
down from the number of minutes selected.B 0
Note:
a. To view the remaining sleep time, press the SLEEP button once.
b. To cancel the sleep time, repeatedly press the SLEEP button until it display “O”.
Sound output selection
In VIDEO mode, you can select output sound for the left and right loudspeakers. Repeatedly press the I/II button to select the sound output.
L+R : Audio signal from audio L input is sent to left loudspeaker and audio signal from audio R input is sent to right loudspeaker.
L+L : Audio signal from audio L input is sent to left and right loudspeakers.
R+R : Audio signal from audio R input is sent to left and right loudspeakers.
PIP function
PIP will let you view two separate source inputs on your TV screen at the same time.
Viewing the PIP picture
Press the PIP button. (Press the PIP button again, to turn
PIP off.)
Selecting the PIP picture mode
Press the MODE button to adjust the PIP picture mode. Each press the MODE button, selects the 16:1, 9:1, double window and multi picture mode.( Multi picture mode is just available when the main picture is in AV mode.)
Moving the PIP picture
Press the POSITION button to adjust the position of sub picture in PIP mode.
Switching the main and PIP picture
Press the SWAP button to switch the main and sub picture in PIP mode.
Viewing the external source input
Press the INPUT button to select the input source of sub picture in PIP mode. Press the PRxy button to select the programme desired in TV mode of sub picture.
18