Connecting the PC as a monitor
PC ANALOG(D-SUB) INPUT
1.Connect the PC ANALOG IN cable (D sub jack) from the monitor output socket of the PC to the PC/DTV input socket of the set.
2.Connect the PC Audio IN cable from the PC to the PC Audio IN of the set.
3.Press the TV/AV or TV/PC button to select PC ANALOG IN mode.
4.Switch on the PC, and the PC screen appears on the set.
The set can be operated as the PC monitor.
DVI (Digital Visual Interface) INPUT
1.Connect the DVI of PC to the DVI input on the TV.
2.Select
Resolution
Mode | Resolution | Horizontal | Vertical | |
frequency(KHz) | frequency(Hz) | |||
|
| |||
| 640 x 480 | 31.5 KHz | 60 Hz | |
VGA | 640 x 480 | 37.9 KHz | 72 Hz | |
640 x 480 | 37.5 KHz | 75 Hz | ||
| ||||
| 720 x 400 | 31.4 KHz | 70 Hz | |
|
|
|
| |
| 800 x 600 | 35.1 KHz | 56 Hz | |
SVGA | 800 x 600 | 37.9 KHz | 60 Hz | |
800 x 600 | 48.1 KHz | 72 Hz | ||
| ||||
| 800 x 600 | 46.9 KHz | 75 Hz | |
| 1024 x 768 | 48.4 KHz | 60 Hz | |
XGA | 1024 x 768 | 56.5 KHz | 70 Hz | |
| 1024 x 768 | 60.0 KHz | 75 Hz | |
|
|
|
| |
WXGA | 1280 x 768 | 47.4 KHz | 60Hz RB | |
1280 x 768 | 47.8 KHz | 60 Hz | ||
| ||||
| 1360 X 768 | 47.7 KHz | 60Hz | |
|
|
|
| |
| 720 x 480p | 31.5 KHz | 60 Hz | |
| 720 x 576p | 31.2 KHz | 50 Hz | |
DTV | 1280 x 720p | 45.0 KHz | 60 Hz | |
1280 x 720p | 37.5 KHz | 50 Hz | ||
| ||||
| 1920 x 1080i | 33.7 KHz | 60 Hz | |
| 1920 x 1080i | 28.1 KHz | 50 Hz | |
|
|
|
|
Note:
a. If the set is cold, there may be a small “flicker” when the set is switched on. This is normal, there is nothing wrong with the set.
b. Some dot defects may appear on the screen, like Red, Green or Blue spots. However, this will have no impact or effect on the monitor performance.
c. The resolution which is not supported will appear at the resolution which gets near to the resolution which is supported
* The standard of the resolution which gets near : H/V sync.
25