NEC 50MP1 user manual Basic Operations

Page 19

Basic Operations

POWER

To turn the unit ON and OFF:

1.Plug the power cord into an active AC power outlet.

2.Press the POWER ON button (on the remote control unit) to turn on the unit.

The monitor’s POWER/STANDBY indicator will light up (green) when the unit is on.

3.Press the POWER OFF button (on the remote control unit or the unit) to turn off the unit.

The monitor’s POWER/STANDBY indicator turns red and the standby mode is set (only when turning off the unit with the remote control unit).

VOLUME

To adjust the volume:

1.Press and hold the VOLUMEbutton (on the remote control unit or the unit) to increase to the desired level.

2.Press and hold the VOLUMEbutton (on the remote control unit or the unit) to decrease to the desired level.

DIGITAL ZOOM

Digital zoom specifies the picture position and enlarges the picture.

1.Press the POINTER button to display the pointer. ()

To change the size of the picture:

Press the ZOOM+ button and enlarge the picture.

The pointer will change to resemble a magnifying glass. ( )

A press of the ZOOM- button will reduce the picture and return it to its original size.

To change the picture position:

Select the position with the ▲▼  buttons.

2.Press the POINTER button to delete the pointer.

AUTO ADJUST

To adjust the size or quality of the picture automatically:

Press the AUTO ADJUST button.

MUTE

To cancel the sound:

Press the MUTE button on the remote control unit to cancel the sound; press again to restore.

DISPLAY

To check the settings:

1.The screen changes each time the DISPLAY button is pressed.

2.If the button is not pressed for approximately three seconds, the menu turns off.

Information

AUTO ADJUST ON setting

When RGB (still picture) input

is selected ...... Fine Picture, Picture ADJ, Position,

and Contrast will be adjusted automatically.

When RGB (motion picture),

VIDEO, or Y/Pb/Pr (component) input

is selected ...... The screen size switches to ZOOM

mode automatically with the superimposed caption displayed fully only when the picture contains dark areas above and below the picture.

12

Image 19
Contents User’s Manual Important Information PrecautionsTo avoid damage and prolong operating life Avertissement PrécautionsDOC avis de conformation Mises en garde et précautions de sécuritéRemarque Limited Warranty Plasma Monitors Contents Ventilation Requirements for enclosure mounting How to Attach Options to the Plasma MonitorIntroduction to the PlasmaSync 50MP1 Plasma Monitor Features you’ll enjoy includeContents of the Package IntroductionFront View Part Names and FunctionRGB Rear View/ Terminal BoardRGB/PC Remote Control Unit5MULTI Battery Installation and ReplacementApprox 7m/ 23ft Using the wired remote control modeHandling the remote control unit Operating RangePersonal computer with a digital RGB output InstallationConnections with Equipment that has a Digital Interface Connecting Your Document CameraConnecting Your VCR or Laser Disc Player Connecting Your DVD PlayerRight Left External Speaker ConnectionsRGB Pin Assignments and Signal Levels for 15 pin RGB AnalogBasic Operations To check the remaining time To set the off timerTo cancel the off timer After the power is turned off with the off timerWatching with a wide screen manual When watching videos or digital video discsWhen watching high definition video source Wide OperationsWatching computer images with a wide screen When Picture Size is set to OFF Supported resolution  Picture Size settingShowing a couple of pictures on the screen at the same time Selecting the input signals to be displayedAdjusting the OSM controls Multi Screen OperationsMenu Operations OSMOn Screen Menu ControlsMain menu Sub menu Functions  Adjusting the computer image Picture Settings MenuAdjusting the picture  Picture adjustment screen Types of picture modes Example Setting the Theater mode Setting the color temperature Setting the color temperatureExample Setting Once the setting is completedExample Adjusting the White Balance Adjusting the color to the desired quality Adjusting the white balance  Types of noise reduction Example Setting NR-3Reducing noise in the picture  NR Sound settings menu Sound Settings MenuAdjusting the treble, bass and left/right balance Example Adjusting the bassWhen Auto Picture is OFF Screen Settings MenuAdjusting the Position, Size, Fine Picture, PictureAdj Example Adjusting the vertical position in the normal modeSetting the on-screen display Function Settings MenuAdjusting the position of the menu display Adjusting the position of the menu displayExample Adjusting the position of the menu display To adjust the positionPower management settings Setting the power management for computer imagesExample Turning the power management function on Power management functionDescription Turning the picture back on POWER/STANDBY indicatorCinema Mode Setting the picture to suit the movieExample Adjusting the Gray Level Example Setting the Cinema Mode to OFFReducing burn-in of the screen Setting RGB3 ADJExample Setting PLE to Lock When you adjust the RGB3 ADJInverse Resetting to the default valuesPLE OrbiterAudio Input Option Settings MenuSetting the allocation of the audio connectors Setting the BNC connectorsBNC Select Setting a computer image to the correct RGB select screenExample Setting the RGB Select mode to Motion To set the RGB select mode to MotionHD Select modes Setting high definition images to the suitable screen sizeExample Setting the 1080B mode to RGB Select modesPicture Size Setting the picture size for RGB input signalsExample Setting the on mode to OFF Information MenuExample Setting the video signal format to 3.58 Ntsc Setting the language for the menusSetting the video signal format Example Setting the menu display to DeutschNtsc Video signal formatsConnections Type of connector D-Sub 9-pin maleExternal Control ApplicationUnit ID 1 and Unit ID CommandCheck Sum CKS, Error Processing, and ACK Communication FormatCommand Reference List Color Gain Data Audio Mute OnAudio Mute Off OSM SelectBright Gain Data Input Mode RequestSharpness Gain Data Contrast Gain DataMulti Screen Select RED Gain DataGreen Gain Data Blue Gain DataVideo ADJ Request Long Life Set Failure Mode RequestAudio Select Set Audio Select RequestSupported resolution Table of Signals SupportedComputer input signals supported by this system Page Symptom Checks Remedy TroubleshootingSignals SpecificationsPage Page NEC T